First time I have built a PC in years and think I have put slightly more than necessary thermal paste as it was seeping out from both two sides although I cleaned it up easily enough and it did not touch any of the green on the CPU.
I am running FX 8320, Hyper 212 Evo, 1x140mm front fan(intake), 1x120mm back (exhaust), 1x140mm top (exhaust).
Are these temps too high and what temps should I expect to see at full load and idle?
Temps after 1hr stress test Prime95:
CPU: min 30c, max 53c
AMD FX 8320: min 10c, max 37c
Temps idle after I stopped Prime95 and reset the min/max and opened paint
I am running FX 8320, Hyper 212 Evo, 1x140mm front fan(intake), 1x120mm back (exhaust), 1x140mm top (exhaust).
Are these temps too high and what temps should I expect to see at full load and idle?
Temps after 1hr stress test Prime95:
CPU: min 30c, max 53c
AMD FX 8320: min 10c, max 37c
Temps idle after I stopped Prime95 and reset the min/max and opened paint
Facebook
Twitter
Instagram