Just built my new PC and turned it on but woulden't display anything to monitor the debug code was A2 so unplugged sata to ssd and hdd and removed gtx 780 then plugged all back in except new location for sata. Then showed debug 99 then unplugged everything but hdmi. Now it just shows 99 and 64 flashes a couple of times before it stays solid 99. I'm using vii hero tx 750 psu 8 GB 1866 fury ram and h100i. Too late to be messing with tonight. Any suggestions or solutions?
PC Won't Display Anything!
- Thread starter Irish25
- Start date
DrBackwater
Honorable
- Jun 10, 2013
- 362
- 0
- 10,810
Each motherboard has different beep codes.
1 what cpu do you have
2 what mother board is it
3 What ram do you have? ddr3 ddr2 ddr4
1 what cpu do you have
2 what mother board is it
3 What ram do you have? ddr3 ddr2 ddr4
TRENDING THREADS
-
-
Question Tried moving SSD from old PC to new one, now it won't boot from either
- Started by scyer327
- Replies: 8
-
Question why my pc dont have sound after install new Nvidia GPU Card?
- Started by sudsaviour
- Replies: 3
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 13
-
Facebook
Twitter
Instagram