Network Drive Always Disconnected

Toggle sidebar Toggle sidebar
ariel_bals

ariel_bals

Reputable
Jun 1, 2014
63
0
4,660
Is there anyway how to sustain my network drive always online and ready to transfer files? (the network cables and my server is good) im using Windows XP..
Thanks Community..
 
Solution
ariel_bals
I do found my solution alone.. My I.P address is set by the ISP into static ex. 122.53.22.192, so I change the IP4 to dynamic.. and I open the command prompt type ipconfig - when i was assign to 192.168.0.7
i change the IP4 dynamic to Static I.P and input 192.168.0.7 and the given subnet and default gate away.
And now my Network doesn't disconnect from the Server.. if it is seen as Disconnected Just open it and it will open as Connected..
After several weeks, still stable network and everytime I open the network it seems so fine... thanks to me. Hope it helps to people who are in trouble same as I did.. you can also ask me for free. :) Godbless
Sort by date Sort by votes
WinOutreach6

WinOutreach6

Honorable
Apr 10, 2013
72
0
10,710
ariel_bals,

In order to keep the mapped drive available for use, you'll need to either save your credentials or enter them every time you want to access the drive. If you're running into issues with the network drive not showing up at all, try remapping the network drive.

Another thing to keep in mind is that Windows XP is no longer supported. You may want to look at your hardware to see if it meets the requirements to upgrade to either Windows 7 or Windows 8.1.

I hope this helps!

Mike
Windows Outreach Team – IT Pro
The Springboard Series on TechNet



 
Upvote 0 Downvote
ariel_bals

ariel_bals

Reputable
Jun 1, 2014
63
0
4,660
I do that suggestions but still even though I remapped the network.. the drive still unstable. MY server is Windows Server 2008. and my OS is Windows XP.
what I do in order to Conenct it again is to disable the network connection and then connect it again.
 
Upvote 0 Downvote
ariel_bals

ariel_bals

Reputable
Jun 1, 2014
63
0
4,660
I do found my solution alone.. My I.P address is set by the ISP into static ex. 122.53.22.192, so I change the IP4 to dynamic.. and I open the command prompt type ipconfig - when i was assign to 192.168.0.7
i change the IP4 dynamic to Static I.P and input 192.168.0.7 and the given subnet and default gate away.
And now my Network doesn't disconnect from the Server.. if it is seen as Disconnected Just open it and it will open as Connected..
After several weeks, still stable network and everytime I open the network it seems so fine... thanks to me. Hope it helps to people who are in trouble same as I did.. you can also ask me for free. :) Godbless
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom