Sign in with
Sign up | Sign in
Your question
Solved

First time custom water loop.

Tags:
  • Water Cooling
  • CPUs
  • Components
Last response: in Components
Share
June 7, 2014 5:53:32 PM

So I am looking into making a custom water loop for my CPU. I have done a lot of research on it and have found out a lot of the information that I needed to feel comfortable to do it. However, there is not much information on how to drain the loop when you need to. So I am looking for some advice on the best way to do this. Also I am wondering if I were to use a fluid from Koolance or some other brand how often would I have to change it?
This is the kit that I am looking at getting:
http://www.performance-pcs.com/catalog/index.php?main_p...

Any help or information on this topic would be greatly appreciated!

More about : time custom water loop

a b à CPUs
June 7, 2014 6:47:43 PM

I am getting into watercooling as well, but I know a thing or two, One way to drain it, is to Open up two ends, and blow through the tubing to get the water out and into a bucket. Taking off you water block helps with this. In about or a little less than a year, you would have to replace the fluid. Just stick with water, and buy colored tubing. If you get distilled water, and a kill coil (or any anti microbial agent), you won't need to drain your loop for over a year.
m
0
l
June 7, 2014 8:03:20 PM

TheMagicalWallaby said:
I am getting into watercooling as well, but I know a thing or two, One way to drain it, is to Open up two ends, and blow through the tubing to get the water out and into a bucket. Taking off you water block helps with this. In about or a little less than a year, you would have to replace the fluid. Just stick with water, and buy colored tubing. If you get distilled water, and a kill coil (or any anti microbial agent), you won't need to drain your loop for over a year.


So once a year is fine with distilled water? That is as long as I put something in there to kill any bacteria?
m
0
l
Related resources
a b à CPUs
June 7, 2014 8:21:45 PM

xUntamedInferno said:
TheMagicalWallaby said:
I am getting into watercooling as well, but I know a thing or two, One way to drain it, is to Open up two ends, and blow through the tubing to get the water out and into a bucket. Taking off you water block helps with this. In about or a little less than a year, you would have to replace the fluid. Just stick with water, and buy colored tubing. If you get distilled water, and a kill coil (or any anti microbial agent), you won't need to drain your loop for over a year.


So once a year is fine with distilled water? That is as long as I put something in there to kill any bacteria?


Yes. And that video that is in the link, is part of a series of how to water cool step by step. Do not buy that kit, that is waaayyy too expensive. If you want a suggestion for one, or for the individual parts (because once you watch that video, you will know how to water cool on your own). Message me. on this forum or through a private message.
m
0
l
June 7, 2014 8:25:57 PM

TheMagicalWallaby said:
xUntamedInferno said:
TheMagicalWallaby said:
I am getting into watercooling as well, but I know a thing or two, One way to drain it, is to Open up two ends, and blow through the tubing to get the water out and into a bucket. Taking off you water block helps with this. In about or a little less than a year, you would have to replace the fluid. Just stick with water, and buy colored tubing. If you get distilled water, and a kill coil (or any anti microbial agent), you won't need to drain your loop for over a year.


So once a year is fine with distilled water? That is as long as I put something in there to kill any bacteria?


Yes. And that video that is in the link, is part of a series of how to water cool step by step. Do not buy that kit, that is waaayyy too expensive. If you want a suggestion for one, or for the individual parts (because once you watch that video, you will know how to water cool on your own). Message me. on this forum or through a private message.


Well could you possibly give me a suggestion right now of what you might do instead of that kit? I have the NZXT Phantom 820 case. Also I was kind of looking for something that I could add a graphics card on to it in the future. Also I do not see the link for a video.
m
0
l

Best solution

a b à CPUs
June 8, 2014 12:29:28 PM

xUntamedInferno said:
TheMagicalWallaby said:
xUntamedInferno said:
TheMagicalWallaby said:
I am getting into watercooling as well, but I know a thing or two, One way to drain it, is to Open up two ends, and blow through the tubing to get the water out and into a bucket. Taking off you water block helps with this. In about or a little less than a year, you would have to replace the fluid. Just stick with water, and buy colored tubing. If you get distilled water, and a kill coil (or any anti microbial agent), you won't need to drain your loop for over a year.


So once a year is fine with distilled water? That is as long as I put something in there to kill any bacteria?


Yes. And that video that is in the link, is part of a series of how to water cool step by step. Do not buy that kit, that is waaayyy too expensive. If you want a suggestion for one, or for the individual parts (because once you watch that video, you will know how to water cool on your own). Message me. on this forum or through a private message.



Well could you possibly give me a suggestion right now of what you might do instead of that kit? I have the NZXT Phantom 820 case. Also I was kind of looking for something that I could add a graphics card on to it in the future. Also I do not see the link for a video.


The 360mm radiator kits from XSPC would be better. You can fit a 360 at the top of your case. 360mm rads will let you have room for a GPU too. I also would reccomend a 120mm rad for the back of your case.

Here is the series. the 4th video shows you how to drain the loop. http://www.youtube.com/watch?v=aHNFhTAvvBA

The series also tells you of the parts he uses, if you don't want a kit

Here is how to liquid cool a graphics card as well. http://www.youtube.com/watch?v=3kF-Hf-z1Jk

Share
June 8, 2014 9:32:00 PM

TheMagicalWallaby said:
xUntamedInferno said:
TheMagicalWallaby said:
xUntamedInferno said:
TheMagicalWallaby said:
I am getting into watercooling as well, but I know a thing or two, One way to drain it, is to Open up two ends, and blow through the tubing to get the water out and into a bucket. Taking off you water block helps with this. In about or a little less than a year, you would have to replace the fluid. Just stick with water, and buy colored tubing. If you get distilled water, and a kill coil (or any anti microbial agent), you won't need to drain your loop for over a year.


So once a year is fine with distilled water? That is as long as I put something in there to kill any bacteria?


Yes. And that video that is in the link, is part of a series of how to water cool step by step. Do not buy that kit, that is waaayyy too expensive. If you want a suggestion for one, or for the individual parts (because once you watch that video, you will know how to water cool on your own). Message me. on this forum or through a private message.



Well could you possibly give me a suggestion right now of what you might do instead of that kit? I have the NZXT Phantom 820 case. Also I was kind of looking for something that I could add a graphics card on to it in the future. Also I do not see the link for a video.


The 360mm radiator kits from XSPC would be better. You can fit a 360 at the top of your case. 360mm rads will let you have room for a GPU too. I also would reccomend a 120mm rad for the back of your case.

Here is the series. the 4th video shows you how to drain the loop. http://www.youtube.com/watch?v=aHNFhTAvvBA

The series also tells you of the parts he uses, if you don't want a kit

Here is how to liquid cool a graphics card as well. http://www.youtube.com/watch?v=3kF-Hf-z1Jk



Ok thank you for your help! What reservoir might you recommend for that case or just in general? I kind of like the idea of the dual 5.25" bay ones.
m
0
l
a b à CPUs
June 8, 2014 11:41:05 PM

xUntamedInferno said:
TheMagicalWallaby said:
xUntamedInferno said:
TheMagicalWallaby said:
xUntamedInferno said:
TheMagicalWallaby said:
I am getting into watercooling as well, but I know a thing or two, One way to drain it, is to Open up two ends, and blow through the tubing to get the water out and into a bucket. Taking off you water block helps with this. In about or a little less than a year, you would have to replace the fluid. Just stick with water, and buy colored tubing. If you get distilled water, and a kill coil (or any anti microbial agent), you won't need to drain your loop for over a year.


So once a year is fine with distilled water? That is as long as I put something in there to kill any bacteria?



Yes. And that video that is in the link, is part of a series of how to water cool step by step. Do not buy that kit, that is waaayyy too expensive. If you want a suggestion for one, or for the individual parts (because once you watch that video, you will know how to water cool on your own). Message me. on this forum or through a private message.



Well could you possibly give me a suggestion right now of what you might do instead of that kit? I have the NZXT Phantom 820 case. Also I was kind of looking for something that I could add a graphics card on to it in the future. Also I do not see the link for a video.


The 360mm radiator kits from XSPC would be better. You can fit a 360 at the top of your case. 360mm rads will let you have room for a GPU too. I also would reccomend a 120mm rad for the back of your case.

Here is the series. the 4th video shows you how to drain the loop. http://www.youtube.com/watch?v=aHNFhTAvvBA

The series also tells you of the parts he uses, if you don't want a kit

Here is how to liquid cool a graphics card as well. http://www.youtube.com/watch?v=3kF-Hf-z1Jk



Ok thank you for your help! What reservoir might you recommend for that case or just in general? I kind of like the idea of the dual 5.25" bay ones.


Any reservoir is fine. I like XSPC Photon ones, which I will be using for my build soon. Really it just depends on what works best with your case. I will have to super glue mine to the case that I will be getting. What case will you be using?
m
0
l
a b à CPUs
June 8, 2014 11:50:45 PM

I would recommend getting a reservoir that has a drain plug. Another option is to put a "T" inline with a drain plug.
m
0
l
June 9, 2014 3:04:02 PM

TheMagicalWallaby said:
xUntamedInferno said:
TheMagicalWallaby said:
xUntamedInferno said:
TheMagicalWallaby said:
xUntamedInferno said:
TheMagicalWallaby said:
I am getting into watercooling as well, but I know a thing or two, One way to drain it, is to Open up two ends, and blow through the tubing to get the water out and into a bucket. Taking off you water block helps with this. In about or a little less than a year, you would have to replace the fluid. Just stick with water, and buy colored tubing. If you get distilled water, and a kill coil (or any anti microbial agent), you won't need to drain your loop for over a year.


So once a year is fine with distilled water? That is as long as I put something in there to kill any bacteria?



Yes. And that video that is in the link, is part of a series of how to water cool step by step. Do not buy that kit, that is waaayyy too expensive. If you want a suggestion for one, or for the individual parts (because once you watch that video, you will know how to water cool on your own). Message me. on this forum or through a private message.



Well could you possibly give me a suggestion right now of what you might do instead of that kit? I have the NZXT Phantom 820 case. Also I was kind of looking for something that I could add a graphics card on to it in the future. Also I do not see the link for a video.


The 360mm radiator kits from XSPC would be better. You can fit a 360 at the top of your case. 360mm rads will let you have room for a GPU too. I also would reccomend a 120mm rad for the back of your case.

Here is the series. the 4th video shows you how to drain the loop. http://www.youtube.com/watch?v=aHNFhTAvvBA

The series also tells you of the parts he uses, if you don't want a kit

Here is how to liquid cool a graphics card as well. http://www.youtube.com/watch?v=3kF-Hf-z1Jk



Ok thank you for your help! What reservoir might you recommend for that case or just in general? I kind of like the idea of the dual 5.25" bay ones.


Any reservoir is fine. I like XSPC Photon ones, which I will be using for my build soon. Really it just depends on what works best with your case. I will have to super glue mine to the case that I will be getting. What case will you be using?


I will be using the NZXT Phantom 820 case for my build. Also how big of a pump would I need? Would 600 lph be okay for a GPU and CPU?
m
0
l
!