Sign in with
Sign up | Sign in
Your question

Monitor no signal

Tags:
  • GPUs
  • no signal
  • Graphics
  • Monitors
  • CPUs
Last response: in Graphics & Displays
Share
June 10, 2014 5:29:09 AM

Everytime I turn my pc on, Everything is fine except my Monitor is blank and has no signal.
I've tried removing the GPU and my memory stick and put them back on again, after this my Monitor started working. Everything works fine but after shutting down the computer and turning it on again, Monitor doesnt work again! :( .

I did remove and put back my GPU and memory ram again and it started working again and after shutting down and turning it on again, it doesn't work again :\

I don't want to open my cpu and do these things all over again just to get the Monitor working.

Does anyone know the problem and solution for this?

Thanks in advanced

More about : monitor signal

a b C Monitor
a c 123 à CPUs
June 10, 2014 5:31:57 AM

check the cable if thats fine then try leaving the monitor off and power on the pc, give windows time to get to the desktop then try turning the monitor on.
if it comes on its likely the power brick in the monitor is dieing.
try another monitor if you can.
m
0
l
June 10, 2014 7:55:57 PM

HEXiT said:
check the cable if thats fine then try leaving the monitor off and power on the pc, give windows time to get to the desktop then try turning the monitor on.
if it comes on its likely the power brick in the monitor is dieing.
try another monitor if you can.


I can't reach through my desktop, because I can't boot my pc :( 

m
0
l
Related resources
a b C Monitor
a c 123 à CPUs
June 10, 2014 8:06:45 PM

so its not the monitor that the issue then.
re-seat your cpu (dismantle the coolder, remove the cpu), check it for bent pins or burns if its clean then re-seat it and lock it down. remount the heatsync.
m
0
l
!