Need help with RAM upgrade not working

Carlos Naldinho

Reputable
Jun 10, 2014
6
0
4,510
I am trying to upgrade a computer with a P5G41T-M LE board to 8GB of ram.

ASUS has the memory specs as 2 x DIMM, Max. 8 GB, DDR3 1333(O.C.)/1066/800 Non-ECC,Un-buffered Memory Dual Channel memory architecture.

My first attempt I purchased 2 sticks of 4GB Kingston 1066 but once installed the computer would not post. I returned those and since 1066s is no longer available locally I was sold some 1333 Corsair. Same results.

I have tried resetting CMOS by using the on-board jumper. All my boot settings changed to default and had to be changed back but computer would still not boot.

I tried playing with the various overclocking settings but I know nothing about those and none of the settings I tried helped.

I've tried booting with just one 4GB stick and again it will not post. If I switch back to my original two sticks of Corsair 2x2GB computer works fine.

I've upgraded the BIOS to the newest version.

I still have the 1333s and would prefer to upgrade to 8GB but I can return them. Does anyone have any suggestions on how I can get them to work or failing that how I can upgrade this motherboard to 8GB?
 

Carlos Naldinho

Reputable
Jun 10, 2014
6
0
4,510
The system does not work even with just one stick. Tried each stick in both slot A and slot B.

The current ram is Corsair XMS3 CMX8GX3M2A1333C9

My previous attempt was with Kingston 1066 but I don't have the part number