Sign in with
Sign up | Sign in
Your question
Solved

Kingston 4GB KVR13N9S8/4 Detected but can't fully start. Need help please.

Last response: in Memory
Share
June 10, 2014 12:07:04 PM

I bought Kingston 4GB KVR13N9S8/4 DDR3 1333mhz, starts fine but when it comes to "Windows is starting" part, it restarts before the windows 7 logo appears. But when my old ram is inserted it works fine. My old ram is 1GB only so I bought a higher one. My 4GB is detected at the first start up(4095mb... OK). And I always ends up in BSOD when I choose the Startup repair, but when i choose Start up normally it restarts.

In my BIOS settings i don't have an XMP settings. So I can't configure it.


Possible solutions I've already done:
Reset CMOS
Update BIOS
Upgrade from 32-bit to 64-bit
Tried both slots


Specs
Intel Core i3 530 2.93Ghz
Biostar H55 HD
1GB Patriot memory DDR3 1333mhz
Palit NVIDIA GeForce 210 1 GB DDR3 Graphics Card

NEED HELP PLEASE :( 

Best solution

a b } Memory
June 11, 2014 7:19:56 AM

Hello,
I'm Jewel with Kingston Technical Support. The problem is that KVR13N9S8/4 is not compatible with your motherboard and CPU. The Intel 5-series chipset and first generation iCore processors do not support high density 4Gbit DRAM which is used to make KVR13N9S8/4. We do not currently support the Biostar H55 HD motherboard as we no longer manufacture memory that is compatible with it. The discontinued part number that is compatible is part number KVR1333D3N9/4G or KVR1333D3N9H/4G. You may be able to find this memory from online resellers who hold onto older memory like www.memoryten.com . For any further assistance, please call us at 1-800-435-0640 (USA and Canada only) M - F 6am - 6pm PT and I or another available Technician will assist you.

Thank you for selecting Kingston as your upgrade partner.
Share
June 12, 2014 9:39:41 AM

kingstonhq said:
Hello,
I'm Jewel with Kingston Technical Support. The problem is that KVR13N9S8/4 is not compatible with your motherboard and CPU. The Intel 5-series chipset and first generation iCore processors do not support high density 4Gbit DRAM which is used to make KVR13N9S8/4. We do not currently support the Biostar H55 HD motherboard as we no longer manufacture memory that is compatible with it. The discontinued part number that is compatible is part number KVR1333D3N9/4G or KVR1333D3N9H/4G. You may be able to find this memory from online resellers who hold onto older memory like www.memoryten.com . For any further assistance, please call us at 1-800-435-0640 (USA and Canada only) M - F 6am - 6pm PT and I or another available Technician will assist you.

Thank you for selecting Kingston as your upgrade partner.


Thank you maam. Now I know what to do. :)  Is it possible to run this type of memory KVR1333D3N92G-SP on my H55 HD? Need your answer miss asap. Thanks again.
m
0
l
Related resources
!