Hello,
So I just put together a new rig. Everything was NIB except my GPU, I had brought it over from my previous build.
The problem: After I completed the build, everything booted up perfectly. I had BIOS run at default-optimal settings, then installed my OS through my disk drive. After I installed my GPU driver and it was installed-black screen. I started up in safe mode, deleted the GPU software, worked fine again. This happens when I also try to install windows updates. The monitor is on, but shows a black screen. (It shows the startup screen from boot though)
Things I've tried:
1)Re-Installed GPU
2)Reset BIOS settings to default
3)Unplugged everything from rear
4)Re-Seated GPU
5)Reset monitor settings
6)Reset resolution settings
7)Unplugged monitor/restarted/plugged into different display port.
My build:
CPU: Intel core i5 4670 3.4ghz LGA1150
Motherboard: ASUS Z97-A
Mem: Corsair Vengeance 8GB DDR3
HDD: WD Black 1TB 7200RPM
SSD: Corsair 120GB Vengeance
PSU: EVGA Supernova 850
GPU: EVGA GTX 770 2GB SC
Liquid cooler: Corsair h100i
Case fans: Corsair x2 H140 x1 H120
Chassis: Corsair 450D
OS: Windows 7 Home Premium
Display: Samsung SyncMaster XL2270
So, I'm at a dead end. If I were to uninstall everything and start fresh-it would work. But when I do updates(which I have to, or no gaming) the monitor won't display.
Please help!
*also, after the GPU updated and failure, my backlight LED's on my keyboard stopped working-besides the light adjustment button and Multimedia/volume buttons. It's a Corsair k95*
I can post pictures if need be when I get home, in posting from my phone.
So I just put together a new rig. Everything was NIB except my GPU, I had brought it over from my previous build.
The problem: After I completed the build, everything booted up perfectly. I had BIOS run at default-optimal settings, then installed my OS through my disk drive. After I installed my GPU driver and it was installed-black screen. I started up in safe mode, deleted the GPU software, worked fine again. This happens when I also try to install windows updates. The monitor is on, but shows a black screen. (It shows the startup screen from boot though)
Things I've tried:
1)Re-Installed GPU
2)Reset BIOS settings to default
3)Unplugged everything from rear
4)Re-Seated GPU
5)Reset monitor settings
6)Reset resolution settings
7)Unplugged monitor/restarted/plugged into different display port.
My build:
CPU: Intel core i5 4670 3.4ghz LGA1150
Motherboard: ASUS Z97-A
Mem: Corsair Vengeance 8GB DDR3
HDD: WD Black 1TB 7200RPM
SSD: Corsair 120GB Vengeance
PSU: EVGA Supernova 850
GPU: EVGA GTX 770 2GB SC
Liquid cooler: Corsair h100i
Case fans: Corsair x2 H140 x1 H120
Chassis: Corsair 450D
OS: Windows 7 Home Premium
Display: Samsung SyncMaster XL2270
So, I'm at a dead end. If I were to uninstall everything and start fresh-it would work. But when I do updates(which I have to, or no gaming) the monitor won't display.
Please help!
*also, after the GPU updated and failure, my backlight LED's on my keyboard stopped working-besides the light adjustment button and Multimedia/volume buttons. It's a Corsair k95*
I can post pictures if need be when I get home, in posting from my phone.