- Apr 26, 2013
- 4
- 0
- 18,510
hi all
need some advise on checking my oc on the gts 250 not sure if there wright and that if im using the wright sofware.
first time overclocking just testing.
my spec
I
SOFTWARE
msi afterburner drive version 9.18.13.3221.332.21
Stress Test Software
MSI Kombustor - using
FurMark- haven't used yet
CPU -z cupid
techpowerup gpu -Z 7 0.7.8
Benchmark Software
heavens benchmark 4.0
3d mark vantage
Tomb Raider in game bench mark
gts 250 stock
Core clokc 738
Memory clock 1100
Bandwith 70.5 GB/s
Shader 1836
oc
Core clock 770
Memory clock 1400
Bandwidth 89.9 GB/s
Shader 1890
ok this is how im doing it but im a bit concerned im might being doing it wrong
i first raised my core to 800 and i sued Kombutor where it detected artifacts so i lowered it till there was no artifacts at 7770 mhz.
i than started on the memory step by step until i ve go to 1400 which seems high compared to other peoples in the forum and their no artifacts in kombutor at all, im i doing this wright.
should i keep upping the memory until i get artifact or a crash in kombustor or im using the wrong software t o test the memory.
don't wanna keep going if its wrong so i stopped and thought i would ask.
need some advise on checking my oc on the gts 250 not sure if there wright and that if im using the wright sofware.
first time overclocking just testing.
my spec
I
CPU - Intel core duo E7200 OC 3.2Ghz
RAM - 4gb ram
Motherboard - Gigabyte g31m-es2k rev 2
Graphic Card - PNY GeForce GTS 250 XLR8 512MB Performance Edition
SOFTWARE
msi afterburner drive version 9.18.13.3221.332.21
Stress Test Software
MSI Kombustor - using
FurMark- haven't used yet
CPU -z cupid
techpowerup gpu -Z 7 0.7.8
Benchmark Software
heavens benchmark 4.0
3d mark vantage
Tomb Raider in game bench mark
gts 250 stock
Core clokc 738
Memory clock 1100
Bandwith 70.5 GB/s
Shader 1836
oc
Core clock 770
Memory clock 1400
Bandwidth 89.9 GB/s
Shader 1890
ok this is how im doing it but im a bit concerned im might being doing it wrong
i first raised my core to 800 and i sued Kombutor where it detected artifacts so i lowered it till there was no artifacts at 7770 mhz.
i than started on the memory step by step until i ve go to 1400 which seems high compared to other peoples in the forum and their no artifacts in kombutor at all, im i doing this wright.
should i keep upping the memory until i get artifact or a crash in kombustor or im using the wrong software t o test the memory.
don't wanna keep going if its wrong so i stopped and thought i would ask.
Facebook
Twitter
Instagram