Hello
i upgrade my pc before 4 months i build my new rig for work - gaming.
And i since i purchased my new pc, i don't monitor my PC using CPUZ or GPUZ
here is my spec
i7-4470K @ 3.5 No overclocking
Asus Maximus VI Hero (bios 1402)
MSI GTX 780 Gaming OC 3GB
Samsung 840 Pro 128GB
16GB Corsair Vengeance
Coolermaster V750 PSU
Yesterday i see CPU-Z & GPU-Z told me that my Motherboard bus link width run on only ( X8 ), i entered the bios and see this photos
beforce try anything - i put my friend gpu (GTX 560 ti reference)
And it's work at 16x !!!!!!!!!
now i try to these things
01- CLEAR CMOS
02- Reset Bios Default
03- Update Bios to Beta Version 1504
04- Change some bios power management
05- Restore Bios version to 1402
06- Change link speed to GEN3 & GEN2
07- Change between Gpu speed Gen1 Gen2
08- Change USB settings "some websites told me that this is because usb boost"
09- Change many cpu power management
10- also i tried many things inside BIOS, And i run many benchmark to see if the GPU in idel mode
but nothing changed!!
this is about bios settings solutions, about hardware.. i try this things
11- Replace GTX 780 to PCIe X16/X8 _2 (Slot RED 2)
12- Change MSI Poewer connectors cables (6 2 / 6 pin)
13- Remove CPU & RAM And clean the CPU Socket & motherboard and PCIE Lane (all lanes)
14- Boot with 1 4GB RAM Only
15- Boot with no sata connected (Remove SDD)
*** i try many things but the problem is still
((((((((gpu dimm post, nvidia gpu, running @ x8 native))))))))
Now i'm in Outside to warranty country & i can't access to warranty place.
Please help me
i read on tomshardware & internet many issue like this, but nothing with the advise work for me
i just need my GPU work @16 Native without any power management
i just need to know that's the exact problem???
is this an power supply issue or motherboard or what???
Please help me
Best regards
i upgrade my pc before 4 months i build my new rig for work - gaming.
And i since i purchased my new pc, i don't monitor my PC using CPUZ or GPUZ
here is my spec
i7-4470K @ 3.5 No overclocking
Asus Maximus VI Hero (bios 1402)
MSI GTX 780 Gaming OC 3GB
Samsung 840 Pro 128GB
16GB Corsair Vengeance
Coolermaster V750 PSU
Yesterday i see CPU-Z & GPU-Z told me that my Motherboard bus link width run on only ( X8 ), i entered the bios and see this photos
beforce try anything - i put my friend gpu (GTX 560 ti reference)
And it's work at 16x !!!!!!!!!
now i try to these things
01- CLEAR CMOS
02- Reset Bios Default
03- Update Bios to Beta Version 1504
04- Change some bios power management
05- Restore Bios version to 1402
06- Change link speed to GEN3 & GEN2
07- Change between Gpu speed Gen1 Gen2
08- Change USB settings "some websites told me that this is because usb boost"
09- Change many cpu power management
10- also i tried many things inside BIOS, And i run many benchmark to see if the GPU in idel mode
but nothing changed!!
this is about bios settings solutions, about hardware.. i try this things
11- Replace GTX 780 to PCIe X16/X8 _2 (Slot RED 2)
12- Change MSI Poewer connectors cables (6 2 / 6 pin)
13- Remove CPU & RAM And clean the CPU Socket & motherboard and PCIE Lane (all lanes)
14- Boot with 1 4GB RAM Only
15- Boot with no sata connected (Remove SDD)
*** i try many things but the problem is still
((((((((gpu dimm post, nvidia gpu, running @ x8 native))))))))
Now i'm in Outside to warranty country & i can't access to warranty place.
Please help me
i read on tomshardware & internet many issue like this, but nothing with the advise work for me
i just need my GPU work @16 Native without any power management
i just need to know that's the exact problem???
is this an power supply issue or motherboard or what???
Please help me
Best regards
Facebook
Twitter
Instagram