i bought my PC 1 years ago and last month my PC suddenly turn off (until today),
when i turn it on all fans on, no beep, blank monitor but my PC often went turn on and off for a brief moment about 1 or 2 sec.
my PC spec
CPU intel G2010
Motherboard Asrock B75M-GL r2.0
RAM Kingston value 2 GB PC 12800 (2 stick)
VGA Sapphire HD 6570 1GB HM
PSU FSP hexa 400
the component i already checked
1. PSU - try it on other PC its run well
2. RAM - just back from RMA 2 days ago
3. Motherboard - checked on distro and its fine so i can't get RMA.
the test i already run
1. put the motherboard on its box and disconnect all component except CPU i got 3 short beeps (i check at AMI BIOS beeps code it turn out normal) i make sure the 4 pin and 24 pin already connect
2. just try 1 stick RAM on socket A then socket B (i do it for both RAM) not work
3. try put both RAM on the socket not work to
i already read this http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems and check it all but still no.
and i already check my CPU and RAM seated correctly.
when i turn it on all fans on, no beep, blank monitor but my PC often went turn on and off for a brief moment about 1 or 2 sec.
my PC spec
CPU intel G2010
Motherboard Asrock B75M-GL r2.0
RAM Kingston value 2 GB PC 12800 (2 stick)
VGA Sapphire HD 6570 1GB HM
PSU FSP hexa 400
the component i already checked
1. PSU - try it on other PC its run well
2. RAM - just back from RMA 2 days ago
3. Motherboard - checked on distro and its fine so i can't get RMA.
the test i already run
1. put the motherboard on its box and disconnect all component except CPU i got 3 short beeps (i check at AMI BIOS beeps code it turn out normal) i make sure the 4 pin and 24 pin already connect
2. just try 1 stick RAM on socket A then socket B (i do it for both RAM) not work
3. try put both RAM on the socket not work to
i already read this http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems and check it all but still no.
and i already check my CPU and RAM seated correctly.