Can someone help me figure out if my Qnix 2710 is working?

Toggle sidebar Toggle sidebar
K

KITTEN MITTONS

Reputable
May 30, 2014
4
0
4,510
I just got it for my new build but my processor has not come in yet so I do not currently have a computer in the house which connects to dvi-d. When I hit the power the power indicator led stays blue for 3 seconds and then starts flashing red. Again it is not connected to a computer. Is it working as intended?
 
Solution
Dogsnake
Yes and no. It is working as intended for the unit being powered on with no video signal coming to it. No because it is intended to operate with a video device attached and a video input. Bottom line be patient and wait till you have the system together. Or you could buy an adapter to connect from whatever computer you have to the dvi-d. My opinion is you have the cart before the horse here. You need to know that your new build is working. Remember you have built a system which is made up of various parts. Once the system is assembled you can then validate the performance of the parts.
Sort by date Sort by votes
Dogsnake

Dogsnake

Distinguished
Oct 20, 2006
2,309
0
20,460
Yes and no. It is working as intended for the unit being powered on with no video signal coming to it. No because it is intended to operate with a video device attached and a video input. Bottom line be patient and wait till you have the system together. Or you could buy an adapter to connect from whatever computer you have to the dvi-d. My opinion is you have the cart before the horse here. You need to know that your new build is working. Remember you have built a system which is made up of various parts. Once the system is assembled you can then validate the performance of the parts.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom