Sign-in / Sign-up
Your question
Solved

Good overclocking Config

Tags:
  • Overclocking
  • Corsair
  • Intel i7
  • RAM
  • Geforce
  • GPUs
  • Configuration
  • MSI-Microstar
Last response: in Overclocking
June 21, 2014 10:54:14 PM

Hey guys, I was trying to overclock my gpu, but I can't get it right, can anyone give me a good setup?

Mobo: Gigabyte Z68ap-d3
Gpu: Geforce GTX 660 Ti
Cpu: i7-2600k 4.0GHz
Ram: 8GB DDR3 668MHz
Power Suply: Corsair 500w
Windows 8.1 64Bits

My preference is for MSI afterburner

More about : good overclocking config

June 21, 2014 11:06:31 PM

i7Baby said:
Google it eg -

http://youtu.be/M_4VhAa4pQc


Alredy saw that video, but when I start to go up with memory clock and core clock my games don't open anymore, they just crash.
m
0
l
Related resources
a c 356 K Overclocking
June 21, 2014 11:10:14 PM

What? - can you go up 10MHz in each?
m
0
l
June 21, 2014 11:17:27 PM

i7Baby said:
What? - can you go up 10MHz in each?


I can go up 10MHz with out crashing, but it doesnt make any diference in the fps, when I start to go to the numbers where I would get a difference it crashes.
m
0
l

Best solution

a c 356 K Overclocking
June 21, 2014 11:23:52 PM

Go up another 10MHz then test it with Furmark or similar. Then repeat till it fails. Don't try large steps. If it fails, then go back to the last steps that worked.
Share
June 21, 2014 11:25:12 PM

i7Baby said:
Go up another 10MHz then test it with Furmark or similar. Then repeat till it fails. Don't try large steps. If it fails, then go back to the last steps that worked.


Ok, im going to test it. se if it works.
m
0
l
June 21, 2014 11:25:42 PM

Can i use 3d mark?
m
0
l
a c 356 K Overclocking
June 21, 2014 11:26:11 PM

Yep - there's heaps.
m
0
l
June 22, 2014 12:00:42 AM

Hey, i was testing and I noticed that at up 60MHz there are some flaws with the image, like some stripes on the screen thar are not sync, how do i fix that?
m
0
l
a c 356 K Overclocking
June 22, 2014 12:06:38 AM

Go back one step till it stops.

Download and run HWInfo - Sensors and post the results - usually 3 screenshots in TinyPic or similar. So we can see if you'v got say temps or voltage problems.
m
0
l
a c 356 K Overclocking
June 22, 2014 12:22:06 AM

Your GPU is at idle

Your PSU vltages are OK

Your CPU is overclocked too much! Its getting too hot (67C!!!!!) Vcore is 1.36V
Drop Vcore to 1.2V and check if your cpu temps are less than 45C
Have you been trying to overclock your cpu too?

Read up before trying any overclocking!!!
m
0
l
June 22, 2014 12:25:37 AM

I read about overclocking, but anyway, What is Vcore and how do i drop it? sorry I don't know these therms, I am new to this stuff.
Yes my Cpu is overclocked, from 3.4GHz to 4.0Ghz
m
0
l
a c 356 K Overclocking
June 22, 2014 12:32:46 AM

You haven't read enough. Read more before trying more overclocking. Use Google.

Read your motherboard manual. Go into Bios and drop the voltage - Vcore

m
0
l
June 22, 2014 12:44:59 AM

i droped, and my computer frozen, so I reset all the overclocking, now the cpu is running normal, with no overclocking.
Im going to read more about it, but i really wanted to overclock my gpu, is there any thing basic that I can do it right now that gives a extra boost?
m
0
l
a c 356 K Overclocking
June 22, 2014 1:02:48 AM

You will know when you've done your research.
m
0
l
June 22, 2014 1:05:22 AM

Ok, thanks for the help
m
0
l