Got a Gigabyte GA-78LMT-USB3 m/board

[foxy52]

I'm installing Kingston HyperX Fury Memory 1333mhz 3 black & 1 blue it will run with 2 n/p in 1 & 3 slots but when use all the slots i keep getting
System Experience boot failure setting in bios
CPU 18x 200 mhz
Memory 1333 mhz
HT speed 2200 mhz
press del to enter Bios setup or press any key to continue I try both tried both of these but didn't touch bios setting & it coming with this can anybody help please

 

[Dark Lord of Tech]

Why do you have 1 blue?

They should always be exact matching pairs.

 

[kingstonhq]

Hi, I'm Jewel with Kingston Technical Support. The issue could be that the memory is mismatched or there could be an issue with the motherboard. The matched pair slots according to the motherboard's manual are 1/2 and 3/4. I would recommend trying the two modules known to work in 1/3 in the paired slots 1/2 and 3/4. If the system does not boot with the memory in those combinations there may be an issue with the motherboard. If all combinations work, alternate the four modules in pairs to see if any cause an issue. For further assistance, please call us at 1-800-435-0640 (USA and Canada only) M - F 6am - 6pm PT and I or another available Technician will assist you.

Thank you for selecting Kingston as your upgrade partner.