Corsair link question.
- Thread starter MatTech
- Start date
Solution
thundervore
Distinguished
- Dec 13, 2011
- 1,030
- 1
- 19,460
select the fan then set the mode to custom curve. you then change the points of fan speed VS temperature. The left column is temperature and the right is RPM.
If you are using 4 fans in push pull on the H100i in push pull then set them all the same setting
If you are using 4 fans in push pull on the H100i in push pull then set them all the same setting
thundervore
Distinguished
- Dec 13, 2011
- 1,030
- 1
- 19,460
The curve depends on your fans. I use fans that spin up to 2700 RPM on my H80i and set the reference temp to the H80i liquid temp for a smoother change in fan speed.
Depending on your CPU point 1 should be the starting fan speed (usually 800 rpm) and the temperature should be about 25c. Point 5 should be should be about 60c and the fan speed should be the max speed your fan support (maybe 2700 rpm). Then adjust the temperature and RPM settings in the middle to balance temperature VS noise level (if you aim for a quiet PC) Ill post a picture of my setting when i get home tonight.
Depending on your CPU point 1 should be the starting fan speed (usually 800 rpm) and the temperature should be about 25c. Point 5 should be should be about 60c and the fan speed should be the max speed your fan support (maybe 2700 rpm). Then adjust the temperature and RPM settings in the middle to balance temperature VS noise level (if you aim for a quiet PC) Ill post a picture of my setting when i get home tonight.
TRENDING THREADS
-
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 18
-
Question Can I plug a docking station to a USB-C 2.0 port to have video output?- Started by jameli
- Replies: 2
-
Facebook
Twitter
Instagram