- Dec 6, 2013
- 84
- 0
- 10,630
I connected all parts and MOBO with case cables, turned the PC on, but there was nothing on the screen.
These are my specs:
Msi H67MS-E23 (B3)
Intel i3 2100 3.10 GHz (I think)
2x2GB DDR3 RAM (Corsair)
When i first started it there were 3 beeps and it did a reset, turned on, reseted again, ..., and then I turned it off.
I started it again and still the same thing.......turned it off........
Then i started it again and didn't heard anything, it was running but still no display.
There was no HDD, but i read on this forum that PC can start without an HDD, that you can go to BIOS, etc.
But HDD isn't working (damaged) and it wasn't pluged in at all.
I just wanted to make sure that other parts are working, because I got them for free, from some other PC.
These are my specs:
Msi H67MS-E23 (B3)
Intel i3 2100 3.10 GHz (I think)
2x2GB DDR3 RAM (Corsair)
When i first started it there were 3 beeps and it did a reset, turned on, reseted again, ..., and then I turned it off.
I started it again and still the same thing.......turned it off........
Then i started it again and didn't heard anything, it was running but still no display.
There was no HDD, but i read on this forum that PC can start without an HDD, that you can go to BIOS, etc.
But HDD isn't working (damaged) and it wasn't pluged in at all.
I just wanted to make sure that other parts are working, because I got them for free, from some other PC.
Facebook
Twitter
Instagram