How to ground yourself

skyguy126 · Jun 26, 2014

This is my first custom pc build and there is a lot of controversy on how to properly use a anti static wrist band. Do I attach the alligator clip to the bare metal of the power supply when the psu is connected to the wall but not switched on, or can I just connect the alligator clip to the bare metal of the pc case itself?

Also, do you recommend using latex/rubber gloves along with the anti static band?

TechyInAZ · Jun 26, 2014

LOL, for over 10 years of building pcs, I've never use a anti static band nor have I shocked a motherboard.

Just make sure to touch the computer case or your stone or hardwood floor (not on carpet) so you can discharge the static every few minutes.

wolverine96 · Jun 26, 2014

See my tutorial:
How To Ground Yourself When Building Your Computer

lfkfkfkffs · Jun 26, 2014

You just need to ground yourself the the level of the stuff that is around you, in the old days it used to be attach it to an unpainted part of your case, but now days pretty much all cases have a powder coat on the inside. So just attach it anywhere in the case and you will be fine. The whole power supply thing is just nonsense and doesn't really matter. I never use one and I haven't zapped anything in 15 years

Karsten75 · Jun 26, 2014

I use an anti-static wrist band attached to the case or to my anti-static mat. I'd never ground myself to a power supply.

Oh, incidentally, will you have the PSU plugged in somewhere while grounding yourself or will it just be sitting there on the table next to you?

FinalDrive · Jun 26, 2014

I have always just clipped the band to the PC case, no power connected. Running to the outlet gives a little more protection as it it truly grounded, but unless you are in a high static environment or standing on shag carpeting in your socks you really shouldn't need that level of grounding.

For situations where a grounding strap is not available I just make sure to touch the case before reaching for any components.

vmem · Jun 26, 2014

honestly, if you sit down on hardwood floor and your skin is touching the floor, you're grounded

In my limited experience of 20 or so builds I have never zapped anything

vagrancyx · Jun 26, 2014

I used to use an anti-static wrap..(not sure of the controversy) but now a days I'm just careful and just use part of my giant desk in my office that has a rubber mat and just take my time.

I've never zapped any of my stuff without one on..I'd imagine as long as you're not working on carpet and rubbing a balloon on your head you'll be fine.

Search

How to ground yourself

skyguy126

Reputable

wolverine96

TechyInAZ

Titan

wolverine96

Reputable

lfkfkfkffs

Admirable

Karsten75

Judicious

FinalDrive

Distinguished

vmem

Splendid

vagrancyx

Reputable

TRENDING THREADS

Latest posts

Moderators online

Share this page