Sign in with
Sign up | Sign in
Your question

Antec TruePower New 650w and r9 290

Tags:
  • Truepower
  • Graphics Cards
  • Antec
  • Components
Last response: in Components
Share
June 30, 2014 7:16:55 PM

So I have this particular combination of PSU and graphics card. The graphic card requires a 6 pin and a 8pin connector. This psu has 4 rails of 12v power, each carrying either 22 or 25 amps. Merely from looking at the labels on the unit it seems that some each of the modular plugs feeds from a different 12v rail. With that in mind should I connect the graphic card to two different modular plugs, or can I connect both to the same and it will be fine?

Thanks for the answers.

More about : antec truepower 650w 290

a b U Graphics card
June 30, 2014 7:53:21 PM

It seems that there is two 12 volt rails so use 2 different modular PCI-E cables from the power supply.
m
0
l
a c 928 U Graphics card
June 30, 2014 8:15:56 PM

Go ahead and use 2 cables.
m
0
l
!