I have 2x (8Gb (2x4Gb), Corsair Vengeance LP, CML8GX3M2A1600C9) and i have constant bsods and thousands errors in memtest, tested this on different volt/mhz/timings. Tried this ram on different pc, works good, 0 errors. Tried different ram(old 1333 samsung one) in my pc, 0 errors, so mb is ok too? Which is the best ram to buy for me?
i5 4690 + z97-a compatible ram
- Thread starter AzaroQL
- Start date
Tradesman1
Legenda in Aeternum
- Jun 5, 2013
- 67,883
- 40
- 126,960
First do you have the latest BIOS? Might check that....with a Z97 and your CPU that DRAM should be fine...if BIOS update doesn't take care of it, try raising the DRAM voltage + 0.05, those should be 1.5 sticks so try at 1.55
Yep, i have the latest bios. The funny thing is, i just came from my friend, where i tested ram, and now it works at 1333, 9-9-9-24, 5.9-6.0v without errors, but before my short trip it was giving me like 2k errors with the same values... Now i have to test 1600MHz..
Tradesman1
Legenda in Aeternum
- Jun 5, 2013
- 67,883
- 40
- 126,960
Your rig may be undervolting the sticks, so try at 1600 w/ the additional voltage, another possible is the same with the MC so can try raising the CPUVTT voltgae the same, about + 0.05 (that feeds the MC (memory controller))
So at 1600 it still unstable, i tried 1.65v, dont want to go higher tho, i tried to find CPUVTT, no results. Here are some screens(not mine), so which one is cpuvtt? There are few missing on these screens: CPU Digital I/O Voltage Offset Mode Sign, CPU Digital I/O Voltage Offset, SVID Support, CPU Input Voltage.
Tradesman1
Legenda in Aeternum
- Jun 5, 2013
- 67,883
- 40
- 126,960
Tradesman1
Legenda in Aeternum
- Jun 5, 2013
- 67,883
- 40
- 126,960
TRENDING THREADS
-
Question New installed W11 on sdd, D drive (HDD) goes to the 100% in seconds
- Started by Emily_Vin
- Replies: 8
-
-
-
Facebook
Twitter
Instagram