So, Im mid way through my build and I dont understand the connectors on the motherboard and how to wire the case power , led , reset etc to the mobo.
My mobo is a as rock h81 pro btc and my case is a corsair carbide spec 01 case.
This image shows the pin connectors on the mobo , it has some pins for gnd to ( i believe thats ground)
http://i62.tinypic.com/io3s3n.jpg
This is what the cable looks like , it has an arrow on the left.
http://i59.tinypic.com/xonqra.jpg
My issue is the I have plugged it in like this
pled + , pled - , power sw ( takes up 2 slots - the second slot should be for gnd but power sw takes p that pin . next on the bottom i have hd led + and - but its only one plug with two holes not two plugs so i dont know which side is positive . next is gnd so i left it blank an then the reset wire . the reset wire is also 2 holes and takes up the bottom gnd pin too.
Thanks for the help guys , i think i explained it properly but im confused myself.
My mobo is a as rock h81 pro btc and my case is a corsair carbide spec 01 case.
This image shows the pin connectors on the mobo , it has some pins for gnd to ( i believe thats ground)
http://i62.tinypic.com/io3s3n.jpg
This is what the cable looks like , it has an arrow on the left.
http://i59.tinypic.com/xonqra.jpg
My issue is the I have plugged it in like this
pled + , pled - , power sw ( takes up 2 slots - the second slot should be for gnd but power sw takes p that pin . next on the bottom i have hd led + and - but its only one plug with two holes not two plugs so i dont know which side is positive . next is gnd so i left it blank an then the reset wire . the reset wire is also 2 holes and takes up the bottom gnd pin too.
Thanks for the help guys , i think i explained it properly but im confused myself.
Facebook
Twitter
Instagram