No display after drying computer wet components

Paps8855

Honorable
Jan 27, 2013
3
0
10,510
So my little sister dropped some juice on my desktop 2 days ago, I immediately disconnected everything from the computer, took all the components out and clean them separately (with some alcohol, a small towel and an old toothbrush for the hard-to-reach spots), then i let it all dry for 2 days. Today I put the mobo, my CPU, and th RAM all together connected to my power supply to see what would happen, but it doesn´t display anything, the CPU fan spins, and the case power and HDD LEDs work fine however i cannot turn the system off with the front panel bottons, the system turns on as soon as I flip the switch on the back of my PSU.

I would like to know wich part is not working properly to know what to buy u.u or if i need to let it dry some more time(D: ?)
I strongly think is the ram stick as i have another CPU wich works fine and i got the same result while testing.
I don´t have any other ram sticks to test

btw my PSU and my HDDs don´t have a single drop of juice on them xD

My system:
-AMD A-10 6800K Richland APU, stock fan
-Super Talent 4Gb of RAM at 1600Mhz
-MSI FM2-A75MA-E35 mobo
-My secondary CPU is a AMD A-4 5300, i have only used it to update the BIOS cause i got an MSI
board with outdated BIOS and i had to use a trinity APU to get the richland working properly.
-Thermaltake Smart SP-650P 650w power supply

Sorry if I misspelled something English isn´t my native language
Thanks in advance for your help :D
 
Solution
you have likely shorted something in your rush to dry it. dismantle it completely and put it in a warm cupboard for 2-3 days. its the only way to make sure all the residual water under the chips and caps has dried up. you can try with a hair dryer but your gonna be at it an hour and even then you may have missed something.
you have likely shorted something in your rush to dry it. dismantle it completely and put it in a warm cupboard for 2-3 days. its the only way to make sure all the residual water under the chips and caps has dried up. you can try with a hair dryer but your gonna be at it an hour and even then you may have missed something.
 
Solution

Paps8855

Honorable
Jan 27, 2013
3
0
10,510


I´ll try that, thank you very much!
I´ll report in a couple of days