Hi,
I just received my Tri-X R9 290 4GB from Newegg.ca and as soon as I got all the drivers installed and opened up CCC, I noticed that my idle temps were ~38C. When I run Furmark, they shoot up to 79C after a couple of minutes. Are these temps normal? According to the site below, the card should be idling at 30C and under Furmark, the temps should be around 74C.
http://www.anandtech.com/show/7601/sapphire-radeon-r9-290-review-our-first-custom-cooled-290/4
My idle temps are the real concern after look at the site. They are close to the 41C of the reference card! Again, is this normal or should I RMA the card?
The help is appreciated!
I just received my Tri-X R9 290 4GB from Newegg.ca and as soon as I got all the drivers installed and opened up CCC, I noticed that my idle temps were ~38C. When I run Furmark, they shoot up to 79C after a couple of minutes. Are these temps normal? According to the site below, the card should be idling at 30C and under Furmark, the temps should be around 74C.
http://www.anandtech.com/show/7601/sapphire-radeon-r9-290-review-our-first-custom-cooled-290/4
My idle temps are the real concern after look at the site. They are close to the 41C of the reference card! Again, is this normal or should I RMA the card?
The help is appreciated!