So, just build a 2nd pc where the pc boots, but there's no display.
When i start the pc, the monitor turns on automaticly, so it detects that the pc is booting. But seems the video signal only stays there for like 1 sec. Seing as the monitor instantly after turning on, tells me that there's no signal.
Motherboard: Asus M5A78L-M USB3 (about 3 years old).
CPU: AMD FX 6300 (new)
GPU: Asus gtx 650 Ti 2gb
RAM: Corsair XMS3 8gb (4x2) 1333MHz
PSU: SilverPower 500w (old)
SSD: Samsung 840 evo 120gb
The motherboard (with the old cpu) and psu worked fine when i put it back in their boxes about 8 months ago, the RAM was used in my current system up uintill about a week ago.
Any suggestions?
When i start the pc, the monitor turns on automaticly, so it detects that the pc is booting. But seems the video signal only stays there for like 1 sec. Seing as the monitor instantly after turning on, tells me that there's no signal.
Motherboard: Asus M5A78L-M USB3 (about 3 years old).
CPU: AMD FX 6300 (new)
GPU: Asus gtx 650 Ti 2gb
RAM: Corsair XMS3 8gb (4x2) 1333MHz
PSU: SilverPower 500w (old)
SSD: Samsung 840 evo 120gb
The motherboard (with the old cpu) and psu worked fine when i put it back in their boxes about 8 months ago, the RAM was used in my current system up uintill about a week ago.
Any suggestions?