Sign in with
Sign up | Sign in
Your question

New to overclocking!!HELP!!, how to oc 1035t

Tags:
  • Overclocking
  • CPUs
Last response: in CPUs
Share
July 9, 2014 2:46:29 PM

hey guys just got a new build:
AMD Phenom II X6 1035T
Cooler Master TX3
Radeon 270X
Biostar TA970
8GB Ram Mushkin
Rosewill G630

I want to oc as high as possible safely but have no idea where to start any help appreciated

More about : overclocking 1035t

a b à CPUs
July 9, 2014 3:37:50 PM

kiickzz said:
hey guys just got a new build:
AMD Phenom II X6 1035T
Cooler Master TX3
Radeon 270X
Biostar TA970
8GB Ram Mushkin
Rosewill G630

I want to oc as high as possible safely but have no idea where to start any help appreciated


Deleted
m
0
l
a b K Overclocking
a c 83 à CPUs
July 9, 2014 3:47:05 PM

kiickzz said:
hey guys just got a new build:
AMD Phenom II X6 1035T
Cooler Master TX3
Radeon 270X
Biostar TA970
8GB Ram Mushkin
Rosewill G630

I want to oc as high as possible safely but have no idea where to start any help appreciated

the best way to do it is to go in to bios and start bumping your multiplier up a little each time. then boot up and see if it has any problems as it goes up eventually it will blue screen at this point start increasing the vcore a little at a time. use the plus/minus on the number pad do this till it gets it stable again. keep repeating till it gets to as hot as you will allow it which is about 60c on that cpu.
m
0
l
Related resources
July 9, 2014 4:21:16 PM

coolcole01 said:
kiickzz said:
hey guys just got a new build:
AMD Phenom II X6 1035T
Cooler Master TX3
Radeon 270X
Biostar TA970
8GB Ram Mushkin
Rosewill G630

I want to oc as high as possible safely but have no idea where to start any help appreciated

the best way to do it is to go in to bios and start bumping your multiplier up a little each time. then boot up and see if it has any problems as it goes up eventually it will blue screen at this point start increasing the vcore a little at a time. use the plus/minus on the number pad do this till it gets it stable again. keep repeating till it gets to as hot as you will allow it which is about 60c on that cpu.

what does HT and all that stuff mean and how about ram clock?

m
0
l
a b K Overclocking
a c 83 à CPUs
July 9, 2014 4:47:16 PM

ht means hyper transport link it needs to be higher than the speed of the ram
m
0
l
a b à CPUs
July 9, 2014 5:08:47 PM

coolcole01 said:
kiickzz said:
hey guys just got a new build:
AMD Phenom II X6 1035T
Cooler Master TX3
Radeon 270X
Biostar TA970
8GB Ram Mushkin
Rosewill G630

I want to oc as high as possible safely but have no idea where to start any help appreciated

the best way to do it is to go in to bios and start bumping your multiplier up a little each time. then boot up and see if it has any problems as it goes up eventually it will blue screen at this point start increasing the vcore a little at a time. use the plus/minus on the number pad do this till it gets it stable again. keep repeating till it gets to as hot as you will allow it which is about 60c on that cpu.


The 1035T has a locked multiplier. He needs to overclock thru the FSB.
m
0
l
July 9, 2014 5:10:36 PM

coolcole01 said:
ht means hyper transport link it needs to be higher than the speed of the ram


How do I know my ram speed because dosent it increase when I increase fsb ?
m
0
l
a b K Overclocking
a c 83 à CPUs
July 9, 2014 5:12:31 PM

it should increase when you increase it go to your dram and see the speed and then increase the fsb and see if it changes
m
0
l
July 9, 2014 5:33:07 PM

coolcole01 said:
it should increase when you increase it go to your dram and see the speed and then increase the fsb and see if it changes


Idk where to find that on my biostar mobo
m
0
l
a b à CPUs
July 9, 2014 5:39:37 PM

kiickzz said:
coolcole01 said:
ht means hyper transport link it needs to be higher than the speed of the ram


How do I know my ram speed because dosent it increase when I increase fsb ?


Download CPUID and Hardware Monitor. It will give you lots of useful system info. They are a must for overclockers. Like your ram speed. What you do is as you raise the fsb you lower your ram multiplier to keep your ram near stock frequency.
m
0
l
July 9, 2014 5:46:23 PM

I do but idk where to go to lower the memory speed, cpu I'd says it's at 666mhz.. I don't have a ram multiplier on my mobo
m
0
l
July 9, 2014 6:05:47 PM

bmacsys said:
kiickzz said:
coolcole01 said:
ht means hyper transport link it needs to be higher than the speed of the ram


How do I know my ram speed because dosent it increase when I increase fsb ?


Download CPUID and Hardware Monitor. It will give you lots of useful system info. They are a must for overclockers. Like your ram speed. What you do is as you raise the fsb you lower your ram multiplier to keep your ram near stock frequency.


i have those...I do but idk where to go to lower the memory speed, cpu I'd says it's at 666mhz.. I don't have a ram multiplier on my mobo
m
0
l
a b K Overclocking
a c 83 à CPUs
July 9, 2014 6:14:34 PM

im not familiar with biostar bios but there will be an option next to the dram settings that will give you options like 1.33 or 1.4 and the like as you raise the fsb llower that to keep it under your rated ram speed
m
0
l
July 9, 2014 6:42:50 PM

coolcole01 said:
im not familiar with biostar bios but there will be an option next to the dram settings that will give you options like 1.33 or 1.4 and the like as you raise the fsb llower that to keep it under your rated ram speed


what does fsb:D ram mean? idk how to lower ram
m
0
l
a b K Overclocking
a c 83 à CPUs
July 9, 2014 6:51:15 PM

kiickzz said:
coolcole01 said:
im not familiar with biostar bios but there will be an option next to the dram settings that will give you options like 1.33 or 1.4 and the like as you raise the fsb llower that to keep it under your rated ram speed


what does fsb:D ram mean? idk how to lower ram


fsb means front side bus
m
0
l
a b K Overclocking
a c 83 à CPUs
July 9, 2014 6:51:44 PM

what does it say the speed is currently
m
0
l
a b à CPUs
July 10, 2014 2:52:40 AM

kiickzz said:
I do but idk where to go to lower the memory speed, cpu I'd says it's at 666mhz.. I don't have a ram multiplier on my mobo


So you have 1333 ram. You have a 970 board correct? It should def have settings for the ram multiplier. It's there somewhere.
m
0
l
!