Sign in with
Sign up | Sign in
Your question
Solved

PWM Fan Splitter Combination

Tags:
  • Components
  • Cases
  • Fan
  • Customization
  • Motherboards
Last response: in Components
Share
July 10, 2014 5:51:49 PM

I am going to make a custom case, one with a lot of fans. My motherboard (at least to be) has 4 fan connectors.
One 3-pin Sys_Fan
One 4-pin Sys_Fan
One 4-pin CPU_Fan
One 3-pin PWR_Fan
(Board: GIGABYTE GA-970A-D3P )

Splitters: A B

My question is: Can I connect the splitters together like this?


Also the way I'm building it for no reason x3 (unfinished) (( little boxes outside of the object are just object i/o zones)


Please answer

(Also is there a way to get to my own specific threads? I've looked and I can't find the button or whatever >.<)

EDIT: May go with a different mobo but I doubt it really matters

More about : pwm fan splitter combination

a c 162 V Motherboard
July 10, 2014 6:04:33 PM

do not connect more then 2 fan on a splitter with a sys fan connector this means your board could handle 4 fans and the cpu one alone or get a fan controller so you will be able to handle more fan ,
m
0
l

Best solution

a b V Motherboard
July 10, 2014 8:02:02 PM

Or you could skip all of that and just get this and not have to worry about anything. It runs off of the PSU power and not the motherboard and uses PWM signlas from the CPU fan header. http://www.frozencpu.com/products/20988/ele-1196/Swifte...
Share
July 10, 2014 8:36:56 PM

Ok thanks... Also, can I connect any splitters to that? Just wondering
m
0
l
!