how to setup h80i

Daniyelfps · Jul 10, 2014

i got inwin 901, but im having a problem setting up the cpu cooler. How should i set it up since the case got terible air flow since the radiator block the air flow.

http://cdn.overclock.net/1/15/500x1000px-LL-153f5f16_1391134549320.jpeg

TheMagicalWallaby · Jul 10, 2014

Did you mean to put a link? There is not link.

Anyways, use the external radiator mounting spot.

Daniyelfps · Jul 10, 2014

TheMagicalWallaby :

if u look at the picture in the link, is it possible to put the radiator between the silver plate and the mother i/o shield, then a fan outside the case on the silver plate, then an fan inside the mother io shield?

like FAN | RADIATOR | FAN put which way should the fan face to get best cooling ?

TheMagicalWallaby · Jul 10, 2014

Daniyelfps :

The fan as an exhaust would be best. You can do so, but you might have to use only on fan which would pull on the other side of the radiator. I don't think this cooler will work, because the H80i use short thick tubing. Can you return the H80i?

Daniyelfps · Jul 10, 2014

its too late for that. So if i use 2 fans on bothsides of the radiator isnt good? what else should i do?

how about i set it up like this? https://imageshack.com/i/n61w539j

TheMagicalWallaby · Jul 11, 2014

Daniyelfps :

I never said that it wasn't good. I am saying that it wont fit. and no, the back fan spot is for a smaller fan. You can put a little fan pushing air trhough, but you need the 120mm fan pulling air through it on the other side. You can put one there, but place a fan in the back adn have it pull air though. this is if you can even get the rad there. the cooler you are seeing in the picture is the H75. That cooler uses longer tubing that the h80i, the H80i most likely will not fit. If it can reach, let me know.

legend001523 · Jul 11, 2014

https://www.youtube.com/watch?v=BWWFjsJONYc

here.

Daniyelfps · Jul 11, 2014

TheMagicalWallaby :

Daniyelfps :

I never said that it wasn't good. I am saying that it wont fit. and no, the back fan spot is for a smaller fan. You can put a little fan pushing air trhough, but you need the 120mm fan pulling air through it on the other side. You can put one there, but place a fan in the back adn have it pull air though. this is if you can even get the rad there. the cooler you are seeing in the picture is the H75. That cooler uses longer tubing that the h80i, the H80i most likely will not fit. If it can reach, let me know.

mhhh... ok, but the space b between there is 57mm, and the thickness of the radiator is 35mm

Search

how to setup h80i

Daniyelfps

Reputable

TheMagicalWallaby

TheMagicalWallaby

Dignified

Daniyelfps

Reputable

TheMagicalWallaby

Dignified

Daniyelfps

Reputable

TheMagicalWallaby

Dignified

legend001523

Splendid

Daniyelfps

Reputable

TRENDING THREADS

Latest posts

Moderators online

Share this page