ram is causing blue screens of death (corsair vengence pro series)

Toggle sidebar Toggle sidebar
I

isaac_

Reputable
May 2, 2014
62
0
4,640
i have had this ram for around 2 weeks now and it supports up to 2400mhz..
my motherboard supports, 2800+oc/2400/2133+oc/1866/1600/1333/1066.
so it should work at 2400mhz. i have it clocked at 2000mhz and it works fine.
im my bios im using a xmp profile and volts on auto.

ram-2x4gb corsair vengence pro series 2400mhz
motherboard - asrock extreme 4
 
Sort by date Sort by votes
volcanoscout

volcanoscout

Dignified
Jan 5, 2014
2,861
3
14,960
This threads been out for a while but I noticed it hadn't be responded to. Have you figured out a fix yet? If not:

What is your RAM voltage showing as? What CPU do you have, and is it overclocked at all? You might need to bump your voltage and/or apply a slight overclock to your CPU to get it to 2400. I'm assuming that you have your mobo BIOS properly update.
 
Upvote 0 Downvote
L

likes0079

Reputable
Jul 3, 2014
90
0
4,640
I have mostly the same problem but worse,
Bought 4GBx4 G.skill Sniper 2400mhz and it BSOD me when high load of RAM.
Turn latency auto, frequency to 1600 Mhz, Voltage at 1.65v, it works fine. Anything further will result BSOD.
Running Asus Z97 Deluxe, I7-4790k 4.0g (it's always 4.1 even I turn voltage to auto)

Would like to know if the OP solved his problem yet and how.
 
Upvote 0 Downvote
volcanoscout

volcanoscout

Dignified
Jan 5, 2014
2,861
3
14,960
Have you tried MemTest or any other memory checker? If not, I'd start there running at least a full cycle with your RAM set at 2400 (XMP profile). If you don't get any errors there, then you can start tweaking the CPU clock. The sticks SHOULD run at their rated speed with only XMP enabled, without any additional tweaks, but reality is that even high-quality components can be finicky. It's possible that you've got a bad stick in the batch.
 
Upvote 0 Downvote
L

likes0079

Reputable
Jul 3, 2014
90
0
4,640



I didn't try Memtest86+, I did a windows built-in memory check(no error) and use Prime95 run Blend.
And it doesn't last longer than 5 mins in all frequency under 2400mhz except for 1600mhz.
I had x.m.p enabled at the first place under the DOCP section of BIOS. Just turn in to profile# means enable right? everything else is auto.

I did not over clock anything. I never touched anything in bios until I found my RAM problem. I have no idea why it is 4.1Ghz instead of 4.0Ghz. Voltage is by default. Temperature of CPU looks fine. Full load stabilize at 70c. Only one or two core will somehow hit 75c for a few seconds and drops back to 70c
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom