HI guys I've got a question my dram led blinks red twice after going through tons of different test mem86 test(4 passes 0 errors,)memok, cmos reset,none helped checked cpu pin if bent there none,checked to make sure cord are all installed well,motherboards on standoff and screw arent overly tighten so i decided to breadboard to locate the problem only when i installed memory does it blink red. Anyways to get to the real question I asked asus how can my memory passes mem 86 test but still have dram led binking red. Asus told me"According to some memory manufacturers website, some memory need higher
voltage and different timings than standard. So it wouldn't mean certainly
the memorys are defective. Please refer to the memory manual and adjust the memory voltage and timings manually to have a test". only problem is my memory didnt come with a maunual just a one small piece of paper with a few pictures on how to properlly install .so i decided to download manual from website but i could not find one for the kingston hyperx fury 2x4 gb.only thing i found was a description of features
what do i adjust the timings and voltages too? And is that all i should adjust? Mine is Kingston hyper x fury 1866mhz 2x4 gbs
Description:
Dual channel available
Capacities of up to 8GB (single) and 8GB–16GB (kits)
Frequency (speed) 1333MHz, 1600MHz, 1866MHz
CAS latency 9-9-9-27 and 10-10-10-30
Voltage 1.5V
Asymmetric heat spreader for stylish heat dissipation
Compatible with P55, H67, P67, Z68, Z77, Z87 and H61 Intel chipsets, as well as A75, A87, A88, A89, A78 and E35 AMD chipsets
My motherboard is Asus m5a97
Cpu:Amd fx 8320
Gpu:radeon 7950
voltage and different timings than standard. So it wouldn't mean certainly
the memorys are defective. Please refer to the memory manual and adjust the memory voltage and timings manually to have a test". only problem is my memory didnt come with a maunual just a one small piece of paper with a few pictures on how to properlly install .so i decided to download manual from website but i could not find one for the kingston hyperx fury 2x4 gb.only thing i found was a description of features
what do i adjust the timings and voltages too? And is that all i should adjust? Mine is Kingston hyper x fury 1866mhz 2x4 gbs
Description:
Dual channel available
Capacities of up to 8GB (single) and 8GB–16GB (kits)
Frequency (speed) 1333MHz, 1600MHz, 1866MHz
CAS latency 9-9-9-27 and 10-10-10-30
Voltage 1.5V
Asymmetric heat spreader for stylish heat dissipation
Compatible with P55, H67, P67, Z68, Z77, Z87 and H61 Intel chipsets, as well as A75, A87, A88, A89, A78 and E35 AMD chipsets
My motherboard is Asus m5a97
Cpu:Amd fx 8320
Gpu:radeon 7950