Reboot and select proper Boot Device

Toggle sidebar Toggle sidebar
Y

yosindrax

Reputable
Jul 12, 2014
13
0
4,510
Hello guys.
I went into this problem recently this morning all randomly and I tried to fix it by following:

1. phase:
- First problem was a I/O-error (it was my HDD on RAID1: Error occurred(0))
RAID0 status: Master Disk(0) -> should work fine
RAID0(stripe): status = normal / bootable = yes

2. phase:
I resetted HDD RAID1 to: Non-RAID
Resulted in -> RAID0(stripe): status: failure / bootable = no

When trying to boot this came up now:
"Reboot and select proper boot device or insert boot media in selected boot device and press a key"

3. phase(where im stuck now):
I deleted my whole RAID volume and created a new.
RAID0(Stripe) status: normal / bootable = yes
HD RAID0 = Member disk(0)
HD RAID1 = Member disk(1)

When trying to boot this still came up now:
"Reboot and select proper boot device or insert boot media in selected boot device and press a key"

The SATA mode = RAID

Boot option priority:
1. Intel Volume0 ( My RAID0(stripe)'s name = Volume0, dont know if it has something in common)
2. P2: TSSTcorp DVDWBD TS-LB23A
3. Disabled (can choose: Realtek PXE B02 D00)

_________________________________________________________________________

Computer information:
- MSI GT780R
- Windows 7
Serial ATA/HDD: WDC WD7500BPKT (750gb)
Serial ATA HDD2: WDC WD7500BPKT (750gb)
Serial ATA/DVD: TSSTciro DVDwB ATAPI
Serial(the last): Empty


Any suggestions would be a BIG help!
- Yosindrax

 
Sort by date Sort by votes
Y

yosindrax

Reputable
Jul 12, 2014
13
0
4,510
Yea I tried to put one of the HDD first named(WDC WD7500BPKT) - both of them is named exactly the same but I did this order:
1. 1st HDD
2. DVD
3. 2nd HDD
4. Realtek PXE

SATA: tried it on IDE and RAID

Same problem appeared: "Reboot and select proper boot device or insert boot media in selected boot device and press a key"

Its like it wouldnt communicate with one of my HDD when starting up because when I press f3 to recover nothing happens at all
My RAID0(stripe) contains 2 harddisks' it says so it seems it has found them but..
I wonder when I deleted the RAID0(stripe) and created a new one that I've deleted everything on my hard disk then and therfor it cant start up?
 
Upvote 0 Downvote
Y

yosindrax

Reputable
Jul 12, 2014
13
0
4,510
All the options in BIOS was set to default - I had the battery out for 5 mins and installed it again stuck at same place:
"Reboot and select proper boot device or insert boot media in selected boot device and press a key"
 
Upvote 0 Downvote
Y

yosindrax

Reputable
Jul 12, 2014
13
0
4,510
Alright I started with trying with only 1 HDD, it leads to exactly the same, tho it only finds one HDD ofcourse and then the RAID0(stripe) -> status: failure / bootable = no ( And I checked it was secondary HDD I took out and the error from phase 1 is also on secondary HDD so primary HDD should work just fine)
But I guess the failure is because the the stripe is set to two HDD's when I created it.

Now I tried taking off the battery to CMOS out for 5 mins and only primary HDD inserted, it leaded to:
exactly the same problem: "Reboot and select proper boot device or insert boot media in selected boot device and press a key"
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom