New memory BSOD

Namlesshero · Jul 14, 2014

Hello,

I'm new to the forum so please point out if I did something wrong.

So just yesterday i got the new memory i ordered Kingstone 2x Kingston HyperX FURY 4GB 1866MHz DDR3 CL10(not a kit). After painful hours it took for me to realize i cant use dual chanel on sticks that aren't made for it I finally got into bios. Both stick show inside (8Gb) but after exiting bios (when windows logo starts to animate) i get a really quick BSOD and i can't read it. I tried changing latency (no effect) but i don't understand all the setting. I would be really thankful for help.

Previous working RAM: CM3x1G1333C9
Motherboard: P55-CD53
CPU: Intel i3 540 3.07Ghz
GPU: GTX 750 Ti

Also sorry for english

Namlesshero · Jul 14, 2014

...maybe i could try updating bios ... i have version 1.0 right now. Could someone tell me what do i have to do http://www.msi.com/support/mb/P55CD53.html#down-bios instructions are a bit so so...

Tradesman1 · Jul 14, 2014

The BIOS update would be a good idea, also might try going in with one stick, enable XMPP and then raise the DRAM voltage to + 0.05 above spec , save, exit shutdown, then install the second stick and give it a try

Namlesshero · Jul 15, 2014

Tradesman1 :

I don't have/can't find XMPP setting, what does it do as for rising the voltage i already tried that as well as single stick and i still couldn't boot.

Also I am not entirely sure how to ubdate BIOS, how do i know if versions from this site are applicable to my mobo (MS 7586 version 1.1 P55-CD53) http://www.msi.com/support/mb/P55CD53.html#down-bios

Namlesshero · Jul 15, 2014

Namlesshero :

Ok so now i have updated BIOS (1.9 ver) at start it gave me BSOD (I gues windows was a bit confused i'm using win 7 x64 btw). Computer is on for about 10 min and no BSOD so i guess i'm fine now. I also tried instaling one stick of HyperX Fury and again recognizes in bios but doesnt load windows. I tried to test it in bios with MemTest86+ and it imediatly freezes, also tried raising voltage to 1.52V but it didn't help. Also i noticed that ram runs 1333MHz with 9-9-9-24 timing (note this is 1866 CL10 ram) by default. I would try changing timings but like I said don't know much about them...

EDIT:i figured out why is the ram runing at 1333, it's becouse my procesor which doesn't support higher frequencis... could i get this ram and lower freq to 1333 http://www.newegg.com/Product/Product.aspx?Item=N82E16820233144 would that work ? Or could it be posible to get the timings of Fury right?

Search

New memory BSOD

Namlesshero

Reputable

Namlesshero

Reputable

Tradesman1

Legenda in Aeternum

Namlesshero

Reputable

Namlesshero

Reputable

TRENDING THREADS

Latest posts

Moderators online

Share this page