Can't play games anymore D: (BSOD and Game crashes)

Jetblack164

Honorable
Jul 18, 2013
24
0
10,520
Ok, so now I have practically given up on myself, my computer is constantly crashing when playing games, it either crashes completely and gives me a BSOD OR it just crashes to dekstop after a while.
Before I get into more extreme detail, here is my setup:

Motherboard: Asus P8Z77 V-PRO
PSU: Corsair RM 750 (PREVIOUSLY CoolerMaster GX650W)
CPU: Intel i7 3770k
GPU: GTX 780 Strix (6GB) [Previously GTX 660ti]
RAM: Corsair DDR3 8GB (Replaced with same model)
Case:Zalman Z11 pro- or something like that
HDD: 1. Seagate Barracuda (2TB for games), 2. Western Digital Caviar Blue (500GB for OS) and occasionally I have one or two extra unnecessary
OS: Windows 8.1


Right, now that we have specs done, this problem has stuck with me for a year or so, I have ruled out almost everything, I'm not so sure. First of I had problems when I first started to install my OS but I finally got it to work (Just including EVERYTHING here), when I did I noticed it started crashing at incredibly ridiculous rates, and was pretty disappointing as I wanted to play games ( to make a note here I am 14 [ was 13] and am not very experienced and this may have something to do with it), Oh yes and by the by I built it myself, another thing to mention. After a while I though, maybe my old computer would help me troubleshoot this problem, so I moved my GPU and PSU to the other computer and guess what? It crashed as well. After that, I decided, " Ok that must be it, lets see if I still crash on my main computer with the same PSU but a different GPU, and yet again it crashed. So, big deal right? No, because I recently replaced my GPU AND my PSU and it still crashes! Disappointing! Well, more side notes may be that I also blew up some RAM, yes me, because I am stupid, but that's beside the point, so I ruled that out as well. But, it could'nt be my Mobo either right? Because I changed it with the old computer but still got crashes. Moreover, one time I blew up my Motherboard as well (Woop, big surprise!) and sent it for warranty, the problem being that it would not go into post because the RAM was supposedly bad, turns out the RAM worked fine and it was the Mobo, now I just mentioned I replaced the RAM, (just speculating here) but I bought the same brand and type, would that mean that the model is bad? I doubt it. Another thing that you may say is the problem is the OS, well, I reinstalled windows countless times and most of them were pirated, but my parents said "Hang on, what about your OS?", so we went out to buy Windows 8, and of course, nothing changed. So now I'm scratching my head here wondering what on earth is wrong with my freaking computer? I suspect my Motherboard, but who knows? OH yes P.S, my Seagate HDD has a broken SATA port, but I fixed it ghetto-ly and glued the plastic bracket thing back on, it works but I kinda doubt it's the reason as I have tried playing on a different computer and yes, of course, it still crashes.


In case you wanted to see my blue screen crashes as of recently here is a link:
https://www.mediafire.com/?39f3sxygq777z0w


There's also a trend in my BSOD crashes, they are almost always from the ntoskrnl.exe, then, you may ask "Try updating drivers..Bla bla bla", well if it was not obvious, I have, considering the amount of times I have reinstalled windows. I was wondering if anyone knows what in the name of Jetblack164 is going on? Thanks in advance for your input :D.

P.S. VERY IMPORTANT! : I have a scratch on my motherboard that I accidentally did while screwing in screws into the case, nothing seems to be affected, but you never know, if in case you would like to know where it is, it is near the plugs, above the PCI slots, there is normally a hole there in a standard ATX board.




P.P.S: My computer some times starts up and then gives me a blank screen, after and sometimes before post.
 

Adroid

Distinguished
Ok what does "I blew up some RAM" mean"? How did you blow it up? Have you been playing around with BIOS settings and adjusting voltages?

Do you get BIOS beep codes on startup? It honestly could be a number of things - but I am leaning towards a RAM or Motherboard issue. It's hard to say for sure with all the random information you gave. Is the scratch on the motherboard deep enough where it has damaged any of the circuitry? Where is the scratch exactly?
 

Jetblack164

Honorable
Jul 18, 2013
24
0
10,520


Alright, sorry for the vague question :mad:, but the blowing up of ram was pretty mundane, it wasn't exactly an explosion, it just stopped working. My motherboard does not rely on beep codes, it has LED's and therefore I can tell it was something wrong with the RAM, but it was probably wrong and it was just the MB. The scratch is DIRECTLY under the Audio ports on the Motherboard, above the screw hole, it does not have any numbers on it, but it looks to be a resistor (who can tell?) and the scratch seems to have ripped the paint of, but I wouldn't know, it wasn't exactly a stab, it was more like a slip, but problems started waaay before the scratching of the Motherboard, and I have replaced RAM. No I have not been overclocking or changing voltages, and I am not sure how the wiring on PCB go on and if a simple scratch on the surface would damage it especially since it is near the audio section. I broke the RAM by mishandling it or something, not sure, I think it also might have been faulty, another note to point out is that; at one point my MB wouldn't accept RAM in a particular slot and decided that it would only accept it in a funny position ( I mean instead of the optimal position it only lets me put it in next to each other).
 

Adroid

Distinguished


Ok so I always recommend a BIOS speaker for builds :

http://www.amazon.com/gp/product/B002W4M0DW/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Anyway, hard to help you with the little information I have. Please google "breadboarding" a PC, and start troubleshooting from scratch.

Your first steps would be to boot up with 1 stick of RAM and on-die (CPU) graphics only. Then you add other stick of RAM, then GPU, etc. See if that will help you troubleshoot the problem.

If you can't boot with the CPU graphics, 1 stick of RAM then the problem is either RAM, motherboard, or PSU. If you had a BIOS beep code speaker that might help you.

Also, you mention you bought new RAM, is it the EXACT same speed and frequency? You typically can't mix and match RAM successfully.. You need to have all of it at the slower speed and identical voltage.
 

Jetblack164

Honorable
Jul 18, 2013
24
0
10,520



This is for troubleshooting computers that will not boot is it not? I have done this before and everything works as it should EXCEPT, when I reinstalled my RAM in my case just because I wanted to start fresh when installing my new GPU and PSU (Which by the way must not be the problem as they have already been replaced, but then again, who knows?), and it gave me a RAM error ( as I have mentioned), so I moved the RAM about so that instead of being in order like X | X | ( X= DIMM slot with RAM , | = DIMM slot without RAM) to | | X X , and that magically worked. I believe that the motherboard is the problem, I just need reassurance, or just another culprit by itself. The RAM was the exact same one, with *PROBABLY* the same clock, the same brand, the same model, and the same price. First I suspected my PSU because the computers my school crash, the two things in common they and I had was that, they both used the 650W PSU by Cooler master and they both had Asus Motherboards. I don't know what that means, but that might help too. One thing I'm confused about is why I need a buzzer when I have specific LED's to identify a fault in the system, would that render the buzzer obsolete? Another thing, my computer only crashes when I play games, so I'm not sure if Breadboarding would help, I will try later today though. Sorry if I'm some kind of nuisance, I'm just not sure what to do..