ASRock FM2A55-VG3+ - PCIe and Hypertransport showing 0mhz + more

FatJoe2887

Reputable
Jul 15, 2014
2
0
4,510
Hello All,

First post and I am rather new at the AMD side of things. I tried researching this for a bit but could not find much information on this. Currently MSConfig is showing my Bios at 1.20 when I believe FM2A55M is at 1.60. Now I do not know if this is the issue but I wanted to check here before flashing my BIOS. I have posted a picture of the AMD Overdrive voltage page below. The Target speed for HT is 500mhz but shows 0 while PCIe shows 100 and is also 0. As well as the voltages are 0 on the target/current on the right. Like I said I am familiar with PC's but not too familiar with overclocking this portion. Everything is running very smooth but when I opened this up just to check things this came to my attention. Current temps run around 30-35 while doing normal windows tasks and 50-65 while playing games such as World of Tanks with the updated graphics engine, CSGO and Wildstar.

Also, if anyone knows why the voltage is highlighted it would greatly help me. I tried lowering it and finally raising it to 1.45 that its at now which should be more than enough after running multiple stress tests with Prime95.

53c5f2c25b2a0.png