liquid cooling pump

darkshelby · Jul 16, 2014

Would having 2 pump make any difference on keeping the cpu and gpu 3 way sli block cool? Or one would just be fine? I have a 120mm 3x and a single 120mm already inatalled with the push n pull on the sigle 120mm.

ahnilated · Jul 16, 2014

if you don't have a big enough radiator it isn't going to matter. I normally say you should have 2 GPU's on a radiator and then the 3rd GPU and the CPU on another one.

Jake Fister · Jul 16, 2014

A good way to look at it is to have the same number of fan slots on your radiators (per side) as you do components. So you've got 4 fan spots and 4 components so you're good. The flow rate is so high that staggering components and cpus isn't a big deal. Definitely put your cpu first since that will dump the least heat into your coolant. One pump would probably be fine for what you have. Especially if you get one of the DDC pumps. Those are higher pressure pumps than the D5. You could even add the EK performance top (or just buy it with it already on) to get a little extra "umph". Hope that helps!

Search

liquid cooling pump

darkshelby

Honorable

ahnilated

Splendid

Jake Fister

Reputable

TRENDING THREADS

Latest posts

Moderators online

Share this page