I have reviewed many of the published answers to the Floppy Diskette Seek failure. Currently I have done the following:
1)removed the floppy diskette from the boot sequence, ( as well as all other drives except for the SATA Hard disk drive.
2)Ran hard disk drive system diagnostics - which it passed, no apparent issues there.
3) Opened up the computer and disconnected, then reconnected all the cables linking all the drives to see if there might be a problem with the connection.
Still though I continue to get the Floppy Diskette Seek failure. For your information I do not have a floppy diskette in the computer. The computer does boot up after hitting the F2 button as requested but this is annoying.
I am currently left with the feeling that there is a problem with the ribbon cable inside the computer.
Any suggestions most welcome.
1)removed the floppy diskette from the boot sequence, ( as well as all other drives except for the SATA Hard disk drive.
2)Ran hard disk drive system diagnostics - which it passed, no apparent issues there.
3) Opened up the computer and disconnected, then reconnected all the cables linking all the drives to see if there might be a problem with the connection.
Still though I continue to get the Floppy Diskette Seek failure. For your information I do not have a floppy diskette in the computer. The computer does boot up after hitting the F2 button as requested but this is annoying.
I am currently left with the feeling that there is a problem with the ribbon cable inside the computer.
Any suggestions most welcome.
Facebook
Twitter
Instagram