My r9 280x vapour x not detect on motherboard and system... no display and signal from any gpu ports

bentong95923

Reputable
Jul 21, 2014
5
0
4,510
Hi guys!!

I got so frustrated about getting my gpu work. I assure that I have installed the gpu correctly with an 8 pins and a 6 pins PCI-E cables in the PCI-e port. However the motherboard and the system seem cannot detect my new gpu, cannot see any info in the BIOS too. My cpu is i5- 2500k which has an integrated graphic card and now I can only use it for display. Got so frustrated about it, try to take it out and install it again but no hopes. I spent quite a lot time to build my desktop but just cannot get it work?!. I have thought about the insufficient of power supply of the psu before but what I can find online is that everyone seems to think for a psu powers more than 500w should be enough to run a system with one gpu... Does anyone have clues?????? I was so confused.....Plz help!!!!

I will enclose my pc spec (with urls for more info) underneath:

--Obsidian Series® 550D Mid-Tower Quiet Case

http://www.corsair.com/en/obsidian-series-550d-mid-tower-quiet-case

--Seasonic X-560w Gold PSU

--8GB G.Skill Ripjaws Z DDR3 PC12800/1600MHz CL9 4x4GB

--Intel i5 2500k

--BenQ CD/DVD drive

--ProlimaTech Megahalems CPU cooler with corsair ap 120mm Fan

--Corsair Force 3 120GB SSD
http://www.corsair.com/en/force-series-3-120gb-sata-3-6gbps-solid-state-hard-drive

--Asus Maximus IV Gene-Z M-ATX motherboard 6x Sata, Onboard X-Fi, Intel Gigabit Ethernet, USB3

http://www.asus.com/Motherboards/MAXIMUS_IV_GENEZ/

--R9 280X

http://www.sapphiretech.com/presentation/product/product_index.aspx?pid=2024&lid=1