Homebuild workstation - Final Spec advice

jonburch

Reputable
Jul 21, 2014
5
0
4,510
Hi there,

I wanted to rack the collective brain on my final (I hope) specification for my homebuild workstation. Please let me know if you think I might have missed anything - my current thinking is that my memory speed (2133) maybe unsupported by the processor but I'm not too sure on that? I'll be mainly running 3dsmax, photoshop, after effects and the occasional game.

Case: Corsair Graphite 760T
Power: Corsair RM850
Motherboard: Asus x79 Deluxe
Processor: i7 4930k 3.4Ghz
Memory: 32Gb (4x8Gb) DDR3 vengeance Pro 2133 11-11-11-27 (CMY32GX3M4A2133C11)
Graphics: Asus GTX 760 Direct CU 11 OC
Storage: 2 x 1TB Seagate Barracuda 7200.14 (ST1000DM003)
Cooling: corsair hydro 100i

Thanks very much in advance
J
 
Solution
You should get 1600Mhz memory because memory performance doesnt make a difference. The performance impact is near negligible outside very artificial benchmarks and APU systems.

No SSD?

schau314

Honorable
Feb 10, 2014
943
0
11,160
IT does not support 2133. IT also seems like this build is a little expensive. Are you really budget conscious or do you just want a great build. Also I think you only need around 650w but you may have 850 for a reason.
 

jonburch

Reputable
Jul 21, 2014
5
0
4,510


Thanks schau.
The reason for the expense is the LGA2011 Hex core processor - it gives me much greater rendering capabilities and the 850w PS will allow me to add another graphics card later down the line.
So, if I'm going for this chip then I have to stick to the 1600 memory?
 

jonburch

Reputable
Jul 21, 2014
5
0
4,510


Thanks manofchalk - good advice.

I'm weighing up the benefits of an SSD over the cost. I think I'll get an SSD down the line to use as a disk cache for editing.
 

jonburch

Reputable
Jul 21, 2014
5
0
4,510


Fair enough - any picks for a cost effective SSD for a boot drive?
 

jonburch

Reputable
Jul 21, 2014
5
0
4,510


Thanks Nightowl, but the quadro's are way too pricey for me. The directx based GTX cards work great with 3dsmax - and just a touch cheaper!