Any problems with my WC setup?

Toggle sidebar Toggle sidebar
B

Bresser

Reputable
May 1, 2014
78
0
4,660
Hello here is my system:

CPU: i5-4670k @ stock (Gonna OC to 4.2-4.3 while on air, and hopefully 4.7-4.8 while on WC)
MOBO: ASRock z97 Extreme4
GPU: Sapphire R9-290 OC Tri-x

I dont think the rest of the system is important for this part.

Ok here are the parts I am planning on getting (if you know of a better part please suggest it):

Pump: http://www.frozencpu.com/products/2128/ex-pmp-27/Swiftech_MCP655-B_12v_Water_Pump_w_38_Conversion_Kit_317_GPH.html

Radiator: http://www.frozencpu.com/products/21322/ex-rad-646/EK_High_Performance_CoolStream_360_PE_Series_Liquid_Cooling_Radiator_EK-CoolStream_PE_360_Triple.html?tl=g30c95s161

Res: http://www.frozencpu.com/products/9576/ex-res-157/Bitspower_Water_Tank_Z-Multi_250_Inline_Reservoir_BP-WTZM250P-BK.html?tl=g30c97s166

Tubing: http://www.frozencpu.com/products/17867/ex-tub-1602/PrimoChill_PrimoFlex_Advanced_LRT_Tubing_12ID_x_34_OD_-_Brilliant_UV_Blue_PFLEXA-34-B.html?tl=g30c99s1614

Fittings: http://www.frozencpu.com/products/7612/ex-tub-315/Bitspower_Black_Sparkle_G14_Barb_Fitting_-_12_ID_BP-BSWP-C01.html?tl=g30c407s1030

Coolant: http://www.frozencpu.com/products/14160/ex-liq-190/EK_EKoolant_Premium_Liquid_Cooling_Premix_Coolant_-_1L_-_UV_Blue.html?tl=g30c337s1547

CPU Block: http://www.frozencpu.com/products/14186/ex-blc-971/XSPC_RayStorm_High_Performance_Acetal_CPU_Liquid_Cooling_Block_-_Intel_Sockets_LGA_115x_1366_2011.html?tl=g30c85

GPU Block: http://www.frozencpu.com/products/23127/ex-blc-1665/Aquacomputer_Kryographics_Hawaii_Radeon_R9_290X_Full_Coverage_Liquid_Cooling_Block_-_Copper_Black_Acrylic_Edition_23588.html?tl=g30c87s143

I was thinking I would need 10 fittings (2 for cpu, 2 for gpu, 2 for rad, 2 for res, and 2 for pump) is that correct? If you see anything wrong with it (e.g. too small res, to weak pump, vice versa, etc.)

OR if you have any suggestions for a better part let me know please.
 
Solution
zachparr2442
i would add another 240rad to keep everything cool expecially since your oveclocking and you have a r9 290 this is the way i would run it also. Res, Pump, 360mmrad, CPU, 240mmrad, GPU, then back to the res. also your going to need extra fitting like 45 degree and possibley 90degree fitting to keep the tubing from bending and keeping it on you blocks better so you do have leaks
Sort by date Sort by votes
zachparr2442

zachparr2442

Honorable
Dec 28, 2013
827
0
11,060
i would add another 240rad to keep everything cool expecially since your oveclocking and you have a r9 290 this is the way i would run it also. Res, Pump, 360mmrad, CPU, 240mmrad, GPU, then back to the res. also your going to need extra fitting like 45 degree and possibley 90degree fitting to keep the tubing from bending and keeping it on you blocks better so you do have leaks
 
Upvote 0 Downvote
Solution
B

Bresser

Reputable
May 1, 2014
78
0
4,660
Yeah just overclocked my i5-4670k to 4.4ghz at 1.19v. max temp of 80 avg of 60 on IBT not to bad if you ask me pretty low voltage for a full 1ghz OC lower than stock voltage actually for some reason
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom