Question about SSDinstall...

evansuk2000

Honorable
Jun 23, 2014
137
0
10,680
Hi all,

I’m going to be getting rid of my standard HDD, and doing a fresh install this weekend (As well a installing a new PSU)…

I’m going to be installing a new Samsung SSD as the main drive, and a new backup 1000G for storage. As this is the first time of doing this, could I just get advice on the following please:

Should I just install the SSD first, then after Windows is installed etc add the second hard drive (Well install the second HDD I guess, but leave a cable out until after?!)

Do I need to do anything else apart from install Windows on the SSD? No formatting of the new drive etc (Just change to ACHI in BIOS?)

What do I need to do to install the 2nd standard HDD when I am ready – simply plug it in and Windows should do the rest?

My MOBO is Gigabyte GA Z77 D3H Rev 1.1 – which slot should I use to plug in the SSD/HDD.

What info should I be installing to the SSD? OS of course…then games I wish to play? And anything else to D drive – photos…music…films etc?

Okay…that’s all for now. Thanks for your time 
 
Solution
I do a bunch of SSD installs, I don't go crazy with all the tweaks people do. You can leave the second drive plugged in if it's unformatted, might as well unplug it to be safe. After you install windows, you can format the terabyte drive.

The only tweaks I do with SSDs: Open disk defrag, click configure, uncheck "run on schedule": also open a command prompt, type "powercfg -h off" which will turn off hibernation and free a few extra gigabytes on the drive, since the hibernation file matches the size of your system ram.

Go into your terabyte drive, make all your user folders, Documents, Pictures etc and then move the location of the current documents, pictures etc to the new location. You do this by right clicking the old folder...

kawininjazx

Distinguished
May 22, 2008
1,372
0
19,460
I do a bunch of SSD installs, I don't go crazy with all the tweaks people do. You can leave the second drive plugged in if it's unformatted, might as well unplug it to be safe. After you install windows, you can format the terabyte drive.

The only tweaks I do with SSDs: Open disk defrag, click configure, uncheck "run on schedule": also open a command prompt, type "powercfg -h off" which will turn off hibernation and free a few extra gigabytes on the drive, since the hibernation file matches the size of your system ram.

Go into your terabyte drive, make all your user folders, Documents, Pictures etc and then move the location of the current documents, pictures etc to the new location. You do this by right clicking the old folder, go to location, and type the location of the folders on the other drive. You can do the desktop and downloads folder as well.
 
Solution