- Jul 24, 2014
- 18
- 0
- 4,510
Hi,
I am new to Tom's Hardware and this one is my first post.
My system specifications are as follows.
Intel i5-3570k with its own cpu cooler
Asrock Z77 Extreme 4
Sapphire AMD 7850 HD OC Edition
Corsair Value Select 4 Gb
Seagate Barracuda 7200.12 1Tb
Asus DVD/CD Rewritable DRW-24B5ST
Dell 22" Full HD Monitor
Logitech G300 Mouse
Logitech G105 Keyboard
After returning from from 1 months holiday, when i powered on my system, i didn't boot for the first times, then i removed the RAM and placed it again the system booted up with no problem.
After 2 hour of computing the system turned off its own, and when i tried to boot it up, i failed for 4-5 times, again i replaced the RAM in another slot, it booted up.
But after half an hour, it system powered off its own, then i thought there would be a problem of dust, so i de assembled the components and assembled it again, i saw Dr Debug code 00, i cleared the CMOS, i started, but shut down in few seconds, and it kept repeating starting up and shut down of its own.
Now, i removed the mobo and attached only RAM, COU, COOLER, but no code was shown in Dr Debug, the system didn't started at all.
Now my problem is that, this is going on. The system starts up after many attempts, and gives code 00 in first successful start up, then after clearing up CMOS again, it boots. But after few minutes, restarts with a blank screen and no code on Dr Debug. The system not runs successfully even for 2 minutes, this restart and shut down keeps going on
I am new to Tom's Hardware and this one is my first post.
My system specifications are as follows.
Intel i5-3570k with its own cpu cooler
Asrock Z77 Extreme 4
Sapphire AMD 7850 HD OC Edition
Corsair Value Select 4 Gb
Seagate Barracuda 7200.12 1Tb
Asus DVD/CD Rewritable DRW-24B5ST
Dell 22" Full HD Monitor
Logitech G300 Mouse
Logitech G105 Keyboard
After returning from from 1 months holiday, when i powered on my system, i didn't boot for the first times, then i removed the RAM and placed it again the system booted up with no problem.
After 2 hour of computing the system turned off its own, and when i tried to boot it up, i failed for 4-5 times, again i replaced the RAM in another slot, it booted up.
But after half an hour, it system powered off its own, then i thought there would be a problem of dust, so i de assembled the components and assembled it again, i saw Dr Debug code 00, i cleared the CMOS, i started, but shut down in few seconds, and it kept repeating starting up and shut down of its own.
Now, i removed the mobo and attached only RAM, COU, COOLER, but no code was shown in Dr Debug, the system didn't started at all.
Now my problem is that, this is going on. The system starts up after many attempts, and gives code 00 in first successful start up, then after clearing up CMOS again, it boots. But after few minutes, restarts with a blank screen and no code on Dr Debug. The system not runs successfully even for 2 minutes, this restart and shut down keeps going on
Facebook
Twitter
Instagram