Gigabyte 970A-UD3P double booting and restarting!

Mace-x

Reputable
Jul 25, 2014
15
0
4,510
Hi, thank you in advance for taking the time to read!

Computer specs:
Gigabyte 970A-UD3P
Amd Fx-8350 (stock cooling & no oc)
G.Skill Ripjaws x 1600mhz 8gb x 1
Asus gtx 550ti
Evga 80plus 600w
Tt commander ms-1

Ok, so far the computer has been all right, tamperatures on idle are between 12 and 30 celcius and under heavy load they are lke this:

Cpu: 62 celcius
Mobo: 42 celcius
NB: 65 celcius

Tomorrow i`ll buy a Coolermaster x6 elite to finish the build properly and run at good temps.

Now, the problem:

1- when i turn the computer on i have a double boot, my computer is not oc`ed and the ram is running at 1600mhz, it seems to be when the computer has been used and or have some heat because if i turn it off for about 2 hours and then turn it on it appears to boot normaly.

2- when i turn off the computer from windows, it turns off, and after around 5 seconds it turns on itself, i really dont know what can be causing this.

i`ve ran the computer 15 minutes in system stability test in aida64, prime 95 torture testing and rendering in 3D max with mental ray. computer seems to be stable, no crashes or hangs.

I`m out of ideas, can anyone help me please?

thank you a lot!
 
What temps are on 12C? When? How measured?

Your cpu is getting way too hot. It should be under 35C on idle and 50C gaming.

What cpu cooler have you got?

Blow the case out - especially fans, filters and coolers.

Re-seat your cpu cooler. If temps still too high, get a better cooler.

Why have you only got one stick of ram? You should have 2.

Change settings in bios - F8 safe mode so pc doesn't restart automatically on shutdown

Bump up the cpu fan speed.
 

Mace-x

Reputable
Jul 25, 2014
15
0
4,510
The temps where measured with aida 64 and on idle are around:

Mobo: 33c
Processor: 15c-40c
NB: 33c
Gpu: 30c

stock fans and cooler, i`ll get a coolermaster x6 elite tomorrow, the processor was assembled with artic silver 5 thermal paste.

Computer is 2 days old so everything is clean and clear :)

i got just one stick because i plan to get 16gb or more, just didnt had enough money to buy all at once

what settings on bios? and i didnt understand the f8 safe mode thing, thanks for your time!
 

Mace-x

Reputable
Jul 25, 2014
15
0
4,510
None of the options worked, system still restarts instead of shutting off, i`ve noticed tho, that if the temps are high i get the double boot, i`ll update the status about it with the cooler master x6 elite tomorrow as it should run cooler, thank you!
 

Mace-x

Reputable
Jul 25, 2014
15
0
4,510
reinstalled win 8.1, nothing
Installed win 7, nothing

Now i installed the coolermaster x6 elite cooler and seems like the double booting has ceased, altrought the restarting when i power off the pc stills there :(

i`ll install win 8.1 back and keep trying possible solutions, any advice?
 

Mace-x

Reputable
Jul 25, 2014
15
0
4,510
reseted cmos first, nothing, reinstalled current bios (F1) and the problem still persist, about virus i seriously doubt it, i just installed windows and i have 2 computers who shares pendrives and hdds so the other one should have issues aswell.

everything in this setup is bought new 2 days ago.

update:
when i updated/reinstalled the bios there was 2 options, restart and shutdown, pressed shutdown and the computer stayed off so i assume is a software problem, now where.... damn! :??:
 

Mace-x

Reputable
Jul 25, 2014
15
0
4,510
Yeah, new cooler is awesome, averything at full load under 50celcius.

The computer stills restarts itself after i shut it down :(
i`ll check that list and report back! thank you!

edit:
the computer doesnt restarts itself and or crashes.

what it does is that, when i turn it off, from windows, it shuts down, and after around 5 seconds it turns itself on again.

from all that list the only thing i havent done is placing the standoffs, altrought my case just had 2 of them bundled?

after some research i found that the case has built in standoffs.
 

Mace-x

Reputable
Jul 25, 2014
15
0
4,510
Cant believe it, i fixed it!!!
it was, for some reason that my video output was the dvi, as soon as i changed it to hdmi everything went to normal, that`s super weird!
thanks a lot for the help i7baby! :D