Safe mode doesn't work.

Toggle sidebar Toggle sidebar
D

Da1amus

Reputable
Jul 25, 2014
5
0
4,510
I tried to boot my computer in safe mode, but it wouldn't load when I used f8 on start-up. I set the computer to automatically boot in safe mode, but now the computer does nothing. Neither of my monitors would get a signal, as though the computer were off. The computer ran fine when booted normally.

My PC:
CybertronPC Strike-GTX
 
Solution
Darkbreeze
Try this. Turn the power on and immediately begin mashing the F8 key repeatedly until you see the boot menu screen for safe mode. If that doesn't work, turn it off then back on and do the same thing but hold down the shift key while hitting the F8 key. If that doesn't work, your F8 key is broken or you don't have Legacy USB enabled in the BIOS which might be a good place to start actually. Go into the BIOS and make sure Legacy USB is enabled then try the above.
Sort by date Sort by votes
Darkbreeze

Darkbreeze

Retired Mod
Jun 24, 2014
80,414
7,632
176,790
Try this. Turn the power on and immediately begin mashing the F8 key repeatedly until you see the boot menu screen for safe mode. If that doesn't work, turn it off then back on and do the same thing but hold down the shift key while hitting the F8 key. If that doesn't work, your F8 key is broken or you don't have Legacy USB enabled in the BIOS which might be a good place to start actually. Go into the BIOS and make sure Legacy USB is enabled then try the above.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom