Hi everyone,
I have Packard Bell S322o PC with win7 64 OEM system.
Yesterday I went to BIOS and I put BIOS setting inadvertently to the default. I pressed F9 and for saving it I pressed F10. Now it cannot find any drive anymore!
It gives this message:
Reboot and Select proper boot or insert boot Media in selected boot device and press any key...
I tried many solution, but no one was helpful. What I have tried so sar.
1- Tried different sata cables
2- Used different HDD on the computer (this one also not found )
3- Checked the HDD with different computer (no proble, it works)
4- Set Sata to Native IDE and after that to ACHI (didn't help)
Here all info about BIOS and HDD. Hopefuly someone can help.
ERROR:
http://postimg.org/image/909fjrkwf/
BIOS info:
http://postimg.org/image/jzfatp2bz/
Advanced BIOS Features:
http://postimg.org/image/8ob2x4063/
Standard COMS Features:
http://postimg.org/image/ejxz7hqih/
Hard Disk Periority:
http://postimg.org/image/fhbftdqzf/
HDD:
http://postimg.org/image/hl4ls8jyt/
I have Packard Bell S322o PC with win7 64 OEM system.
Yesterday I went to BIOS and I put BIOS setting inadvertently to the default. I pressed F9 and for saving it I pressed F10. Now it cannot find any drive anymore!
It gives this message:
Reboot and Select proper boot or insert boot Media in selected boot device and press any key...
I tried many solution, but no one was helpful. What I have tried so sar.
1- Tried different sata cables
2- Used different HDD on the computer (this one also not found )
3- Checked the HDD with different computer (no proble, it works)
4- Set Sata to Native IDE and after that to ACHI (didn't help)
Here all info about BIOS and HDD. Hopefuly someone can help.
ERROR:
http://postimg.org/image/909fjrkwf/
BIOS info:
http://postimg.org/image/jzfatp2bz/
Advanced BIOS Features:
http://postimg.org/image/8ob2x4063/
Standard COMS Features:
http://postimg.org/image/ejxz7hqih/
Hard Disk Periority:
http://postimg.org/image/fhbftdqzf/
HDD:
http://postimg.org/image/hl4ls8jyt/
Facebook
Twitter
Instagram