FX 4300 OCed 4.7ghz stable on MSI 760GMA-P34 haha

Fidgetmaster

Reputable
May 28, 2014
548
0
5,010
FX-430047ghzBF4_zps0cebad21.png


It actually can be done and as much as I don't want to admit, Its actually competing very well with my 920 haha. I want to go further but I'm afraid haha, can't believe its even handling this haha,

about the same fps 70-100 r9 270... I'm getting when the 920 is 3.6-3.8ghz.....
 

Fidgetmaster

Reputable
May 28, 2014
548
0
5,010
I'm assuming they are in the 70-80c range....I think HWmonitor tmpin1 is vrm temp on this board and it is showing temps in that range don't hold me to that though, unless its NB/SB....Haven't seen any throttling.... CPU temps Highest I seen after playing awhile right at 61/62c....
 

Fidgetmaster

Reputable
May 28, 2014
548
0
5,010
Who knows VRMS might be blistering hot after awhile....but if that CPU temp/or any of these temps is accurate at all... highest I seen was 61/62c
more like 58-60c on average....It sure is performing/playing like there is no throttling...seems pretty smooth.
 

SuperSaiyanSagan

Reputable
Dec 28, 2014
1
0
4,510
I have also experimented with my 760gma and an fx-6300

Managed to get a VERY NEAR stable overclock of 233mhz base block, pushing the cpu to 4077 at the base multiplier and setting my ram to 1864 on a 1:4 multiplier.

NB and HT both at auto with NB running around 2400 and HT at around 2600 as shown in CPU-Z

with mos-c1 on mosfets, the vrm are reaching about 61C

stable in AIDA64 but crashing after about 8 hours of working from my PC