No signal from graphic card!

Hamza Afzal · Jul 28, 2014

Hi,i just installed my ATI Radeon hd 5450 but it doesnt gives me any signal!
I dont know that its seated properly or not!
And i am in a doubt that its not seated properly!
Please give me a solution and tips to check that it seated properly or i have to install the driver first and then install the graphic card!
Thanks in advance!!

i7Baby · Jul 28, 2014

Try another card to see whether its the card or your pc.

Try the card in another pc to see if its the card.

drkatz42 · Jul 28, 2014

Hamza Afzal :

When inserted properly, the card will feel solid in the pci-e slot. The external dvi-d, hdmi etc will line up properly on the outside of the case. If you have a flashlight, you will see that all of the copper on the bottom of the card are not exposed as they are sitting properly in the pci-e slot.

Murissokah · Jul 28, 2014

Hamza Afzal :

When properly installed, the card's PCI-E connector will be fully inserted in the slot, as drkatz42 mentioned. Also, there is usually a locking mechanism that will lock when the card goes all the way in. You can see it in this picture:

670px-Install-a-PCI-Express-2.0-16X-Graphics-Card-Step-6.jpg

See the white thingey on the right? It is in the locked position.

Hamza Afzal · Aug 6, 2014

Hi,on the same day i firsty added my graphic card to pci-e slot.
Then inserted the vga in motherboard vga slot.
Then i just simply installed the drivers and shtdown my computer.
Then insterted my vga into graphic card!
Drivers problem

Search

No signal from graphic card!

Hamza Afzal

Reputable

i7Baby

Titan

drkatz42

Honorable

Murissokah

Distinguished

Hamza Afzal

Reputable

TRENDING THREADS

Latest posts

Moderators online

Share this page