R Ringanar I Reputable May 27, 2014 36 0 4,530 Jul 28, 2014 #1 My friend oc'ed his qx6850 on 3.4GHz.But when he ran prime 95 cpu-z says that its on 2.04GHz because the multiplier is 6,but in the bios he set it to 10.How can he set it to always be 10?
My friend oc'ed his qx6850 on 3.4GHz.But when he ran prime 95 cpu-z says that its on 2.04GHz because the multiplier is 6,but in the bios he set it to 10.How can he set it to always be 10?
olafgarten Distinguished Dec 16, 2011 301 0 18,860 Jul 28, 2014 #2 Did he save the settings in the bios? Upvote 0 Downvote
R Ringanar I Reputable May 27, 2014 36 0 4,530 Jul 28, 2014 #3 olafgarten : Did he save the settings in the bios? yes Upvote 0 Downvote
RobCrezz Expert Ambassador Mar 14, 2013 19,080 99 75,190 Jul 28, 2014 #4 Tell him to turn off Speedstep to stop it clocking down. Upvote 0 Downvote
R Ringanar I Reputable May 27, 2014 36 0 4,530 Jul 28, 2014 #5 RobCrezz : Tell him to turn off Speedstep to stop it clocking down. Intel Speedstep disabled and still clocks it self down Upvote 0 Downvote
RobCrezz : Tell him to turn off Speedstep to stop it clocking down. Intel Speedstep disabled and still clocks it self down
RobCrezz Expert Ambassador Mar 14, 2013 19,080 99 75,190 Jul 28, 2014 #6 Check temperatures, it might be thermal throttling Upvote 0 Downvote
R Ringanar I Reputable May 27, 2014 36 0 4,530 Jul 28, 2014 #7 RobCrezz : Check temperatures, it might be thermal throttling Well idles are about 50 and 100% load is about 65 Upvote 0 Downvote
RobCrezz : Check temperatures, it might be thermal throttling Well idles are about 50 and 100% load is about 65