Arcamax Reputable Jul 16, 2014 26 0 4,530 Jul 29, 2014 #1 is it possible to wire solar panels in series and parallel all in one circuit.
rgd1101 Don't Moderator Nov 7, 2011 73,349 3,861 176,290 Jul 29, 2014 #2 yes http://physics.bu.edu/py106/notes/Circuits.html Upvote 0 Downvote
Arcamax Reputable Jul 16, 2014 26 0 4,530 Jul 29, 2014 #3 rgd1101 : yes http://physics.bu.edu/py106/notes/Circuits.html How cause i tried making an solar phone charger before and i must of did it wrong then... i have 9 panels, three in series That is resistors, u are telling me it is same. Thx Upvote 0 Downvote
rgd1101 : yes http://physics.bu.edu/py106/notes/Circuits.html How cause i tried making an solar phone charger before and i must of did it wrong then... i have 9 panels, three in series That is resistors, u are telling me it is same. Thx
Arcamax Reputable Jul 16, 2014 26 0 4,530 Aug 4, 2014 #4 i dont see how this is possible. I've tried using this diagram just below page 14 in this link http://www.fsec.ucf.edu/en/education/k-12/curricula/use/documents/use_18_series_parallelcircuits.pdf except only using 3 sets of 3 cells. i used a multimeter to test the amps, but it doesn't give anything. Can someone please help me Figure this out. Upvote 0 Downvote
i dont see how this is possible. I've tried using this diagram just below page 14 in this link http://www.fsec.ucf.edu/en/education/k-12/curricula/use/documents/use_18_series_parallelcircuits.pdf except only using 3 sets of 3 cells. i used a multimeter to test the amps, but it doesn't give anything. Can someone please help me Figure this out.
Arcamax Reputable Jul 16, 2014 26 0 4,530 Aug 25, 2014 #5 does anyone have any other answers please Upvote 0 Downvote
kanewolf Titan Moderator May 29, 2013 37,375 3,294 156,790 Aug 25, 2014 #6 What panels do you have? Upvote 0 Downvote
Arcamax Reputable Jul 16, 2014 26 0 4,530 Sep 15, 2014 #7 sorry took so long to anwser... they are supposed to be 2.5 volts and max 145mA, but they're more like 2.5 volts 8mA when i multimeter it Upvote 0 Downvote
sorry took so long to anwser... they are supposed to be 2.5 volts and max 145mA, but they're more like 2.5 volts 8mA when i multimeter it