Sign in with
Sign up | Sign in
Your question
Closed

340.52 NVIDIA Driver

Tags:
  • Nvidia
  • Graphics Cards
  • SLI
  • Graphics
Last response: in Graphics & Displays
Share
July 29, 2014 5:05:59 PM

I get an error on start up that says NVIDIA Graphics card not installed correctly. The SLI connector is attached to the SYNC/SDI finger on the graphics card. The options are shut down now or later.

im not even using SLI i am using the following hard ware:

GTX 760 OC

GTX 650 dedicated PHYSX

16GB Kingston Hyper X RAM

ASUS P7P55-D MOBO

H80i CPU water cooler

i7 (8 thread) 2.8 GHZ CPU, OC = 3.52 GHZ

2 x 1TB hhd

i've had this problem with this driver and the last one and this current one. the last driver i've had no issue with so far is 335.23.


any help would be awesome thanks :) 


More about : 340 nvidia driver

a b Î Nvidia
a b U Graphics card
August 5, 2014 10:18:42 AM

Try installing the drivers with only one card in (since they are not in SLI anyway) and see if the drivers take. Try doing a clean install, sometimes just putting them on top of one another causes problems. Then try installing the 650 again and seeing if Nvidia detects it no problem and set it back to your PhysX card. Hopefully it's just a hiccup.
Score
0
August 5, 2014 12:00:29 PM

CraigN said:
Try installing the drivers with only one card in (since they are not in SLI anyway) and see if the drivers take. Try doing a clean install, sometimes just putting them on top of one another causes problems. Then try installing the 650 again and seeing if Nvidia detects it no problem and set it back to your PhysX card. Hopefully it's just a hiccup.


i tried this method and no luck at first i didn't even recognize the GTX 650 any more and i think i had a boot problem at first. finally go em both working again but still same error message with these new drivers.

Score
0
Related resources
August 5, 2014 12:21:26 PM

i've posted a picture of the error seems only a few of us are getting this
Score
0
a c 468 Î Nvidia
a c 678 U Graphics card
August 5, 2014 2:06:28 PM

Don't use the SLI connector for a dedicated PhysX card.
Score
0
August 5, 2014 2:38:51 PM

i'm not using an SLI connector and i get this error with every driver past 335.23. and i've also tried CraigN's method with no resolve
Score
0
August 7, 2014 4:20:02 AM

I've had problems with latest drivers. Found the 335.23. was the best. At least all my programmes work ok with that. Had problems with some not loading with latest driver installed.
Score
0
September 22, 2014 10:07:31 AM

UPDATE: i've just installed driver 344.11 and same issue im not sure why this is if any one finds a solution lemme know
Score
0
!