Pleaseeeeeee can someone help, im a newbie to this so please have some patience
This rig ive built over the past 2 wks and this is my first build from fresh but I have some experience in custom builds
The issue I'm having is that im trying to get the Ram to run at 2400mhz again, I say again as the system was running fine at that speed but randomly on a start up the mobo started to go into a boot loop self testing phase and would not come out of it until I pushed the MEM OK button, it would reset when the LED display got to 35 or 39, (checking the manual this is seems to be a RAM issue) I have tried the XMP profile (2 profiles 2133 & 2401) and manually inputting the numbers to get the speed back to 2400mhz but to no avail, I have selected the XMP profile that allows 2133mhz and the PC boots and runs fine, and im sure I can use this without any problems but its buggin the hell out of me why I cant get it to reboot at 2400mhz speed? I have cleared CMOS reflashed and installed the latest FW but nothing works it just continues in this endless bootlooping cycle (which btw is that safe to do??)..
as I said im new to this and OC so I haven't messed with any voltage settings I know the DRAM volt is currently 1.65 allowance but like I said it all loaded fine but now it doesn't. I have searched and searched for any tips but there doesn't seem to be anything that I can find that relates to what my problem is..
any help or advice would be great
The basic Setup
Hero Vii mobo with ROG front panel (Which has had to be returned due to the 4th digit not being displayed on the RPM LED)
intel 4790k Devils canyon
hyperx beast 32mb 2400mhz ram (Kit of 4x8mb)
asus gtx770
EVGA 850w PSU modulated
Corsair H55
8 additional fans 6 being Corsair & 2 side exhaust case fans
Samsung evo SSD
2 extra HD totalling 4TB
Windows 7 64bit Ultimate
sorry to list it all but I know people need to know as much possible regarding a system.
This rig ive built over the past 2 wks and this is my first build from fresh but I have some experience in custom builds
The issue I'm having is that im trying to get the Ram to run at 2400mhz again, I say again as the system was running fine at that speed but randomly on a start up the mobo started to go into a boot loop self testing phase and would not come out of it until I pushed the MEM OK button, it would reset when the LED display got to 35 or 39, (checking the manual this is seems to be a RAM issue) I have tried the XMP profile (2 profiles 2133 & 2401) and manually inputting the numbers to get the speed back to 2400mhz but to no avail, I have selected the XMP profile that allows 2133mhz and the PC boots and runs fine, and im sure I can use this without any problems but its buggin the hell out of me why I cant get it to reboot at 2400mhz speed? I have cleared CMOS reflashed and installed the latest FW but nothing works it just continues in this endless bootlooping cycle (which btw is that safe to do??)..
as I said im new to this and OC so I haven't messed with any voltage settings I know the DRAM volt is currently 1.65 allowance but like I said it all loaded fine but now it doesn't. I have searched and searched for any tips but there doesn't seem to be anything that I can find that relates to what my problem is..
any help or advice would be great
The basic Setup
Hero Vii mobo with ROG front panel (Which has had to be returned due to the 4th digit not being displayed on the RPM LED)
intel 4790k Devils canyon
hyperx beast 32mb 2400mhz ram (Kit of 4x8mb)
asus gtx770
EVGA 850w PSU modulated
Corsair H55
8 additional fans 6 being Corsair & 2 side exhaust case fans
Samsung evo SSD
2 extra HD totalling 4TB
Windows 7 64bit Ultimate
sorry to list it all but I know people need to know as much possible regarding a system.