Hi,
I assembled a PC for the first time, however it is not booting. What I see is a sequence of LED blinks - DRAM - VGA - CPU - DRAM - VGA - CPU - DRAM - VGA - BOOT DEVICE LED (this one stays lit). There see no display. I have connected a display port to a monitor, however I am not even reaching the POST stage so I don't feel this is a display issue. However, seeing the display would help me in debugging the issue. The CPU fans start running as I power on the system and once the boot device led lights up, they slow down.
Configs:
Asus Z97 - AR
Memory - DDR3 1600MHz, 3x8GB
Processor. i74790k (I have not attempted any overclocking)
PCIe wifi adapter (I tried unplugging it, but to no benifit)
256GB SSD
2TB HDD
750W Kingwin ABT 750mm
No GPU
I even tried doing a jump start (plug the connector in 1-2 pins to 2-3 pins when the system is turned off and unplugged, then wait for few minutes and then plug it back and restart), however this did not help either.
I have not disconnected the HDD/SDD till now, I am clueless what next should I try. Any suggestions?
edit: my hard disks do not contain any OS and are completely empty
[video="https://www.youtube.com/watch?v=-1s7vgN1bwA"][/video]
I assembled a PC for the first time, however it is not booting. What I see is a sequence of LED blinks - DRAM - VGA - CPU - DRAM - VGA - CPU - DRAM - VGA - BOOT DEVICE LED (this one stays lit). There see no display. I have connected a display port to a monitor, however I am not even reaching the POST stage so I don't feel this is a display issue. However, seeing the display would help me in debugging the issue. The CPU fans start running as I power on the system and once the boot device led lights up, they slow down.
Configs:
Asus Z97 - AR
Memory - DDR3 1600MHz, 3x8GB
Processor. i74790k (I have not attempted any overclocking)
PCIe wifi adapter (I tried unplugging it, but to no benifit)
256GB SSD
2TB HDD
750W Kingwin ABT 750mm
No GPU
I even tried doing a jump start (plug the connector in 1-2 pins to 2-3 pins when the system is turned off and unplugged, then wait for few minutes and then plug it back and restart), however this did not help either.
I have not disconnected the HDD/SDD till now, I am clueless what next should I try. Any suggestions?
edit: my hard disks do not contain any OS and are completely empty
[video="https://www.youtube.com/watch?v=-1s7vgN1bwA"][/video]