i have 1*1000 rpm 120mm fan puling air in in front,1*1000 rpm 120 mm fan pushing out air in back and 1*2000 rpm 120 mm pushing air out of the case on the side ?so my question is is this the right way
It should be air in from the front, sides and bottom and out at the top and rear. It's also nice to have more air being pushed in than out. Then you get positive pressure in the case which helps keep dust out.
i have only 3 fan options 1 pulls in front,1 push out on back,1 push out on side .so i'm wondering where should i put my 2000 rpm ? rest of two are 1000 rpm
i have only 3 fan options 1 pulls in front,1 push out on back,1 push out on side .so i'm wondering where should i put my 2000 rpm ? rest of two are 1000 rpm
Front is the safest place to have an intake.. sides and back accumulate more dust.. so its better to have exhausts in the back and sides.. never put them as intake
i have a built in dust filter in front of my case.will putting the 2000 rpm on side make any difference than putting it on back?fyi when gaming,stressing or benchmarking the gpu gets really hot and pushes hot air on the side of case
i have a built in dust filter in front of my case.will putting the 2000 rpm on side make any difference than putting it on back?fyi when gaming,stressing or benchmarking the gpu gets really hot and pushes hot air on the side of case